Page 1 of 1
Crank guy
Posted: Wed Apr 18, 2018 6:36 pm
by Mark O'Neal
Does anyone know a good crank guy in the Phoenix area?
Re: Crank guy
Posted: Wed Apr 18, 2018 8:37 pm
by vortecpro
Mark O'Neal wrote: ↑Wed Apr 18, 2018 6:36 pm
Does anyone know a good crank guy in the Phoenix area?
Yancer ---------very good, we also grind a very nice crank out of my shop as well.
Re: Crank guy
Posted: Thu Apr 19, 2018 1:51 am
by FC-Pilot
I have Specialty machine do most of my stuff and he has another shop do all of his crank stuff. He (the crank guy) does a good job and is reasonably priced. I don't know his name though. I will see if I can get a hold of Specialty Machine and find out for you.
Paul
Re: Crank guy
Posted: Fri Apr 20, 2018 1:42 pm
by n2xlr8n
Is Castillo still in the LA area?
I used to use him in the early 90s.
Re: Crank guy
Posted: Sun Apr 22, 2018 12:27 pm
by vortecpro
Electronic chrome in Sun Valley Ca is also extremely good.
Re: Crank guy
Posted: Sun Apr 22, 2018 1:07 pm
by tjs44
Yes he is,also Marine Crankshaft in Santa Ana.Tom