Page 5 of 7
Re: 4.6250 piston in a stock 350 block
Posted: Sat Oct 07, 2017 1:26 am
by GARY C
blykins wrote: ↑Wed Oct 04, 2017 1:59 pm
I only know what I personally see here on the forum.
As I mentioned before, I don't see how Speed Talk is any one man's advertising venue. There are tons of other guys who are as knowledgeable or more so, who pop on here to help non-professionals and don't advertise services or parts for sale out in the open.
Same here, if an engine builder post an engine build with dyno results he has just advertised even though you don't see it that way. If he doesn't post that then people like me have no way of knowing what is possible or knowing who is out their producing good results for me to choose who I would go to for info or a build!
Oddly enough the EMC thread doesn't get bashed even though it is 100% advertising and promotes 80% of professional engine builder getting some of the best advertising available.
The fact is whether you want to admit it are not this issue only comes up when David Vizard's name is in the thread and it has been that way years before he joined this forum (do a search) except back then everyone bashed anyone that stood up for him and dogged him for not coming on here and speaking for him self, now that he is hear the bitch is that he's advertising.
If he quits posting the bitch will be that he bailed out and couldn't take it!
The fact is it's not your forum and it's not mine and if Don has an issue with Davids post that is his prerogative to address David on that. They do know each other so he will if he chooses to but the 4th grade comments and complaining and guys attacking peoples threads to demean them make me and other have no desire to post anything HERE!
And sadly the RUDE remarks only seem to come from the guy that or supposedly the top of the food chain, all us pee on's that are here to learn are Here to learn.
To me it is actually sad when the guys that are suppose to be intelligent can't counter anything with data so they resort to childish comments and rolly eyes and laughy faces, I wouldn't even consider that acceptable from my children!
But it does expose who they are and diminishes anything factual they may present and thats bad for the forum and them!
Re: 4.6250 piston in a stock 350 block
Posted: Sat Oct 07, 2017 4:13 am
by The Radius Kid
GARY C wrote: ↑Sat Oct 07, 2017 1:26 am
And sadly the RUDE remarks only seem to come from the guy that or supposedly the top of the food chain, all us pee on's that are here to learn are Here to learn.
To me it is actually sad when the guys that are suppose to be intelligent can't counter anything with data so they resort to childish comments and rolly eyes and laughy faces, I wouldn't even consider that acceptable from my children!
But it does expose who they are and diminishes anything factual they may present and thats bad for the forum and them!
Good point.
There's a lot of keyboard cowboys out there just waiting to lasso somebody.
Re: 4.6250 piston in a stock 350 block
Posted: Sat Oct 07, 2017 6:47 am
by kimosabi
Why put so much into it? It's the internet. People do shit online they would never do face to face. It's just the nature of the beast. Sad but true.
Re: 4.6250 piston in a stock 350 block
Posted: Sat Oct 07, 2017 8:20 am
by user-23911
The best form of compliment is when all the idiots are trying to put you down all the time.
So the more idiots.........the better you are.?
Going back to 1980 ish........I'd hang out at the book shops........find a book by DV.........Magic.
Read it....put it back, come back , buy it.
Bought it .......loaned it out to a mate, never seen it again.
So if some clown is trying to put you down..........It's due to the water, chemtrails, being murican?
Being a brit in murica might be a clue?
Re: 4.6250 piston in a stock 350 block
Posted: Sat Oct 07, 2017 8:22 am
by GARY C
kimosabi wrote: ↑Sat Oct 07, 2017 6:47 am
Why put so much into it? It's the internet. People do shit online they would never do face to face. It's just the nature of the beast. Sad but true.
Thats true with most people but I am pretty much a D!(k in person to.
Re: 4.6250 piston in a stock 350 block
Posted: Sat Oct 07, 2017 11:05 am
by RevTheory
Wow Gary, you
are a prick!
Re: 4.6250 piston in a stock 350 block
Posted: Sat Oct 07, 2017 12:53 pm
by GARY C
RevTheory wrote: ↑Sat Oct 07, 2017 11:05 am
Wow Gary, you
are a prick!
Shhh don't tell anyone.
Re: 4.6250 piston in a stock 350 block
Posted: Sun Oct 08, 2017 10:15 pm
by pdq67
This crap still alive?
Geez!!
pdq67
Re: 4.6250 piston in a stock 350 block
Posted: Sun Oct 08, 2017 10:41 pm
by lefty o
joe 90 wrote: ↑Sat Oct 07, 2017 8:20 am
The best form of compliment is when all the idiots are trying to put you down all the time.
So the more idiots.........the better you are.?
Going back to 1980 ish........I'd hang out at the book shops........find a book by DV.........Magic.
Read it....put it back, come back , buy it.
Bought it .......loaned it out to a mate, never seen it again.
So if some clown is trying to put you down..........It's due to the water, chemtrails, being murican?
Being a brit in murica might be a clue?
murica, is that near ethiopia!
Re: 4.6250 piston in a stock 350 block
Posted: Mon Oct 09, 2017 2:27 am
by midnightbluS10
No. Never seen a map? First day on the internet? People have been calling USA "Murica" for years.
Still. We ain't in Africa. You know that's where Ethiopia is, right?
As many hater as DV has here, he must be doing something right.
Re: 4.6250 piston in a stock 350 block
Posted: Mon Oct 09, 2017 5:58 am
by kimosabi
Hater or lovers. Then you have the majorit who don't really care who is who. A poster is a poster, what's in that post matters most.
That rhyme is free y'all. Got more.
So where's the piston at Schmidt?
Re: 4.6250 piston in a stock 350 block
Posted: Mon Oct 09, 2017 10:53 am
by lefty o
midnightbluS10 wrote: ↑Mon Oct 09, 2017 2:27 am
No. Never seen a map? First day on the internet? People have been calling USA "Murica" for years.
Still. We ain't in Africa. You know that's where Ethiopia is, right?
As many hater as DV has here, he must be doing something right.
this is AMERICA! only punk azzed kids and people with zero respect call this country murica!
Re: 4.6250 piston in a stock 350 block
Posted: Mon Oct 09, 2017 10:58 am
by RevTheory
kimosabi wrote: ↑Mon Oct 09, 2017 5:58 am
Hater or lovers. Then you have the majorit who don't really care who is who. A poster is a poster, what's in that post matters most.
That rhyme is free y'all. Got more.
So where's the piston at Schmidt?
There isn't one. This thread is another hit-piece from someone who's supposed to be a grown-ass adult who just couldn't sit on his hands for a few days to see what Vizard was talking about.
Re: 4.6250 piston in a stock 350 block
Posted: Tue Oct 10, 2017 7:18 pm
by leahymtsps
GLHS60 wrote: ↑Tue Oct 10, 2017 12:26 pm
This thread has become confusing...
Did the OPer state a 350 SBC or just a 350??
Could it be in a single cylinder 350 cc Engine with a 4.625' bore??
What would be the stroke??
"20.8 in would get you close"
Tom
Re: 4.6250 piston in a stock 350 block
Posted: Wed Oct 11, 2017 2:49 pm
by Stan Weiss
GLHS60 wrote: ↑Tue Oct 10, 2017 12:26 pm
This thread has become confusing...
Did the OPer state a 350 SBC or just a 350??
Could it be in a single cylinder 350 cc Engine with a 4.625' bore??
What would be the stroke??
Thanks
Randy
1.271316"
117.475 mm
32.29142 mm
349.9999 c's
Stan