4.6250 piston in a stock 350 block

Open

Moderator: Team

GLHS60
Pro
Pro
Posts: 378
Joined: Fri Oct 15, 2010 1:55 am
Location: Sherwood Park, Alberta, Canada

Re: 4.6250 piston in a stock 350 block

Post by GLHS60 » Tue Oct 10, 2017 7:38 pm

I was thinking CC's not CID.

Thanks
Randy
Sherwood Park
Alberta,Canada

User avatar
Stan Weiss
Guru
Guru
Posts: 3353
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: 4.6250 piston in a stock 350 block

Post by Stan Weiss » Wed Oct 11, 2017 2:49 pm

GLHS60 wrote:
Tue Oct 10, 2017 12:26 pm
This thread has become confusing...

Did the OPer state a 350 SBC or just a 350??

Could it be in a single cylinder 350 cc Engine with a 4.625' bore??

What would be the stroke??

Thanks
Randy
1.271316"

117.475 mm
32.29142 mm
349.9999 c's

Stan
Stan Weiss / World Wide Enterprises
Offering Performance Software Since 1987
Image
http://www.erols.com/srweiss/index.html

User avatar
Stan Weiss
Guru
Guru
Posts: 3353
Joined: Tue Feb 20, 2007 1:31 pm
Location: Philadelphia, PA
Contact:

Re: 4.6250 piston in a stock 350 block

Post by Stan Weiss » Wed Oct 11, 2017 2:51 pm

leahymtsps wrote:
Tue Oct 10, 2017 7:18 pm
GLHS60 wrote:
Tue Oct 10, 2017 12:26 pm
This thread has become confusing...

Did the OPer state a 350 SBC or just a 350??

Could it be in a single cylinder 350 cc Engine with a 4.625' bore??

What would be the stroke??

"20.8 in would get you close"

Tom
20.83313"
349.9998 ci

Stan
Stan Weiss / World Wide Enterprises
Offering Performance Software Since 1987
Image
http://www.erols.com/srweiss/index.html

GARY C
Guru
Guru
Posts: 3373
Joined: Tue May 14, 2013 10:58 pm

Re: 4.6250 piston in a stock 350 block

Post by GARY C » Wed Oct 11, 2017 7:40 pm

So there is more than one way to skin a cat! I just don't recommend eating it. :D
I am not sure the oil pan would fit most cars.

Post Reply