Steve Brown/Lobes @ Terry Walters does Elite Performance/Enders cam/heads???
Posted: Sat Jul 15, 2017 12:00 am
Interesting comment by a reader on the Pro Stock build on Engine lab.com
stating Steve Brown at Terry Walters Performace in Roanoke VA, does their
cam & heads, could it be true?
http://www.enginelabs.com/engine-tech/p ... r-numbers/
Don't really know, but here's some food for thought!!!
At least two people I know go VERY FAST that use Steve Browns /Lobes [YB
name] cams or cam profiles. That's Chris Uratchko & George Bryce. You may
remember quite a few years ago, Chris had a 420 odd inch Chevy, it was one
of the first using Steve's cams [ Steve Brown's / Lobes cam lobes are
designed by him, they are not someone elses copied lobe] from memory it
picked up around 90hp with a cam change only, made 1000 odd hp by 8000 &
went on to about 1040ish...it's a few years ago I learnt about this so the
#'s may be a
little off, but I know it won't be by much.
So, no doubt Chris is hooked beyond belief, so ever since, Chris uses Steve Brown's/Lobes lobes. I won't go into the heads & manifolds at this point, but there's been lots of work there as well, as you can well imagine.
As for George Bryce [Star Racing], head/port design, injection, cams etc.,
Steve's your man.
So, does Steve Brown do Elites heads, cams, I don't know, but he surely looks very capable.
I remember Steve [Lobes] on YB a few years ago making a comment when Enders
won the Pro Stock championship, congratulating them....was he really just
patting himself on the back?
Food for thought!!
stating Steve Brown at Terry Walters Performace in Roanoke VA, does their
cam & heads, could it be true?
http://www.enginelabs.com/engine-tech/p ... r-numbers/
Don't really know, but here's some food for thought!!!
At least two people I know go VERY FAST that use Steve Browns /Lobes [YB
name] cams or cam profiles. That's Chris Uratchko & George Bryce. You may
remember quite a few years ago, Chris had a 420 odd inch Chevy, it was one
of the first using Steve's cams [ Steve Brown's / Lobes cam lobes are
designed by him, they are not someone elses copied lobe] from memory it
picked up around 90hp with a cam change only, made 1000 odd hp by 8000 &
went on to about 1040ish...it's a few years ago I learnt about this so the
#'s may be a
little off, but I know it won't be by much.
So, no doubt Chris is hooked beyond belief, so ever since, Chris uses Steve Brown's/Lobes lobes. I won't go into the heads & manifolds at this point, but there's been lots of work there as well, as you can well imagine.
As for George Bryce [Star Racing], head/port design, injection, cams etc.,
Steve's your man.
So, does Steve Brown do Elites heads, cams, I don't know, but he surely looks very capable.
I remember Steve [Lobes] on YB a few years ago making a comment when Enders
won the Pro Stock championship, congratulating them....was he really just
patting himself on the back?
Food for thought!!