Chinese Chery engines.
Moderator: Team
-
- Expert
- Posts: 976
- Joined: Sat Oct 27, 2007 4:53 am
- Location: Yorkville, Illinois (60 miles SW of Chicago)
Chinese Chery engines.
I have a 2011 John Deere Gator for repair that someone drunk rolled and sold to my customer. He wants me to fix it. It has a 3 cylinder Chery 12v twincam engine with Deere tags. Aside from the knocking because it ran upside down for too long, it seems like a quality engine. Cast iron block, aluminum head, fuel injection, heated oxygen sensor, catalytic converter. I'll snap some pics of the guts once I get the engine pulled and disassembled. My next stop on the job is a frame machine. I cannot confirm it's a Chery engine, but that is what a John Deere mechanic told me that I used to work with in the back shop on the small equipment. Chery makes cars in China, for all that are interested...
For now, here is the Gator.
For now, here is the Gator.
- loudandproud
- Pro
- Posts: 201
- Joined: Mon Feb 06, 2012 8:35 pm
- Location: Mechanicsburg, PA
Re: Chinese Chery engines.
that things fixable??
"Buying parts I dont need, with money that I dont have, to impress people that I dont know".
-
- Expert
- Posts: 976
- Joined: Sat Oct 27, 2007 4:53 am
- Location: Yorkville, Illinois (60 miles SW of Chicago)
Re: Chinese Chery engines.
If a competent guy with a frame machine can do it locally, yes. If not, Deere sells new frames. Either way it's fixable at $18K new and being a 2011 with 30 hours. I doubt it even survived long enough to get its first oil change.
This is the hardest/most compact job I've ever done. Gonna end up and in frame rebuild. Casting logos indicate Chery... Everything I've seen thus far is better than a '93 geo metro/suzuki swift quality. Super wide timing belt, clean castings, nice machine work.. It sucks we can't build stuff like this in America anymore.
I'm about 25 minutes away from pulling the crank. The pan/rear seal plate/oil pump are unbolted. Tomorrow is a new day.
This is the hardest/most compact job I've ever done. Gonna end up and in frame rebuild. Casting logos indicate Chery... Everything I've seen thus far is better than a '93 geo metro/suzuki swift quality. Super wide timing belt, clean castings, nice machine work.. It sucks we can't build stuff like this in America anymore.
I'm about 25 minutes away from pulling the crank. The pan/rear seal plate/oil pump are unbolted. Tomorrow is a new day.
-
- Expert
- Posts: 858
- Joined: Sun Nov 04, 2007 8:47 pm
- Location: Corona, CA
- Contact:
Re: Chinese Chery engines.
I've been working in China for about 8 years now. Chery makes a decent car, compared to some of the other local car companies (there are MANY). Most of these car companies use basically copied engines (usually licensed to do so, old model engines) with some slight variances - such as a bore or stroke change to suit the power requirements.
http://en.wikipedia.org/wiki/Chery
http://www.cheryacteco.com/en/
http://en.wikipedia.org/wiki/Chery
http://www.cheryacteco.com/en/
Re: Chinese Chery engines.
I think I need new glasses. The first time I read this post I read Chevy instead of Chery?
man was I confused!
Donny
man was I confused!
Donny
Re: Chinese Chery engines.
You're not alone.....Shopboss wrote:I think I need new glasses. The first time I read this post I read Chevy instead of Chery?
man was I confused!
Donny
Ken
Over the hill but still learning!
Retaining it is the hard part.
Retaining it is the hard part.
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: Chinese Chery engines.
Likely one of Deer's more profitable machines. A primitive gator with a chinese chery engine costs more than a brand new Chevy Sonic....crazyman wrote: Either way it's fixable at $18K new and being a 2011 with 30 hours. I doubt it even survived long enough to get its first oil change.
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit
-
- Expert
- Posts: 858
- Joined: Sun Nov 04, 2007 8:47 pm
- Location: Corona, CA
- Contact:
Re: Chinese Chery engines.
In China, they're commonly 1.5L engines. They might also make a 1.3, 1.5, 1.6, and 1.8L for cars in the same design. The QQ got some smaller engines.Hasdfo wrote:Good product launched Chinese chery engines..any body tell me the capacity of this engine??? looking so superb and made i think in a good scale..and which scale is used for the engine making??
The engines are available from CheryActeco, but not with small orders, I presume.
-
- Expert
- Posts: 976
- Joined: Sat Oct 27, 2007 4:53 am
- Location: Yorkville, Illinois (60 miles SW of Chicago)
Re: Chinese Chery engines.
It's funny this thread got revived today. My customer just today delivered it back from the frame shop, straight as an arrow. I'll check and see if it lists a displacement.
Nevermind. Google saved me a trip to the barn.
Type 4-cycle gas, Electronic Fuel Injection (EFI) -
Closed Loop System
Cylinders/Valving V-Twin, OHV
Horsepower* 62 (46.2 kw)
Displacement 839 cc
Maximum torque 57.5 (42.4 ft lbs) @ 4000 rpm
Cooling system Liquid
Battery 340 CCA
Alternator 38 amp @ 7250 rpm,13.5V - regulated
Nevermind. Google saved me a trip to the barn.
Type 4-cycle gas, Electronic Fuel Injection (EFI) -
Closed Loop System
Cylinders/Valving V-Twin, OHV
Horsepower* 62 (46.2 kw)
Displacement 839 cc
Maximum torque 57.5 (42.4 ft lbs) @ 4000 rpm
Cooling system Liquid
Battery 340 CCA
Alternator 38 amp @ 7250 rpm,13.5V - regulated
-
- Expert
- Posts: 858
- Joined: Sun Nov 04, 2007 8:47 pm
- Location: Corona, CA
- Contact:
Re: Chinese Chery engines.
Must be the QQ engine!
That's the car that was a near copy of the Chevy Spark, which got Chery sued.
That's the car that was a near copy of the Chevy Spark, which got Chery sued.
-
- Guru
- Posts: 2997
- Joined: Mon Jun 14, 2010 3:16 pm
- Location: Lake Elizabeth, CA
Re: Chinese Chery engines.
I figured the US would be flooded with cheap (< $9,000) Chinese cars by now. I wonder what's taking them so long?
Joe Facciano
- loudandproud
- Pro
- Posts: 201
- Joined: Mon Feb 06, 2012 8:35 pm
- Location: Mechanicsburg, PA
Re: Chinese Chery engines.
crash test ratings??JoePorting wrote:I figured the US would be flooded with cheap (< $9,000) Chinese cars by now. I wonder what's taking them so long?
"Buying parts I dont need, with money that I dont have, to impress people that I dont know".
Re: Chinese Chery engines.
...... or maybe they realized that they can actually be sued in North America.
Ken
Ken
Over the hill but still learning!
Retaining it is the hard part.
Retaining it is the hard part.