I do not know how many of you use Performance Trends Engine Analyzer. But Performance Trends released EA Pro v3.9 in early Dec. It can now read my head files.
http://performancetrends.com/PDFs/Engin ... lement.pdf
Engine Analyzer Pro User's Manual Supplement v3.9 (new v3.9 features only)
Cylinder Heads Flow Data at 28" H2O.
http://users.erols.com/srweiss/tablehdc.htm
Stan
Performance Trends Engine Analyzer
Moderator: Team
- Stan Weiss
- Vendor
- Posts: 4821
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: Performance Trends Engine Analyzer
That is very cool.Stan Weiss wrote:I do not know how many of you use Performance Trends Engine Analyzer. But Performance Trends released EA Pro v3.9 in early Dec. It can now read my head files.
http://performancetrends.com/PDFs/Engin ... lement.pdf
Engine Analyzer Pro User's Manual Supplement v3.9 (new v3.9 features only)
Cylinder Heads Flow Data at 28" H2O.
http://users.erols.com/srweiss/tablehdc.htm
Stan
BTW, I was looking for data on a world merlin iron oval 269cc intake port, 2.30/1.88 valves.
- Stan Weiss
- Vendor
- Posts: 4821
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Keith,
Thanks, this is all that I have.
World Merlin oval iron 269/137 cc, 2.30/1.88 valves
sf600 .800 316/290
sf1020 .800 293/268
http://www.worldcastings.com/products/m ... heads.html
Stan
Thanks, this is all that I have.
World Merlin oval iron 269/137 cc, 2.30/1.88 valves
sf600 .800 316/290
sf1020 .800 293/268
http://www.worldcastings.com/products/m ... heads.html
Stan
-
- Guru
- Posts: 1393
- Joined: Wed Feb 20, 2008 10:43 pm
- Location: Colleyville, TX
- Stan Weiss
- Vendor
- Posts: 4821
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Hi Daryl,
I would be very interested in any flow numbers for any heads that you would like to share and have listed in my cylinder head flow table. I am always looking to add new cylinder heads / information and, flow numbers. I have worked with data sent to me in many different formats from copies of flow sheets to reports generated from Audie's Flow PRO. The best way to sent any information would be to email srweiss@erols.com or just hit the email button at the bottom of this message.
Thanks
Stan
I would be very interested in any flow numbers for any heads that you would like to share and have listed in my cylinder head flow table. I am always looking to add new cylinder heads / information and, flow numbers. I have worked with data sent to me in many different formats from copies of flow sheets to reports generated from Audie's Flow PRO. The best way to sent any information would be to email srweiss@erols.com or just hit the email button at the bottom of this message.
Thanks
Stan