my '66/'67 350SS camaro survivor car..

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Post Reply
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

my '66/'67 350SS camaro survivor car..

Post by pdq67 »

What would it take to make the old SOB run like onne these new 800 hp jobbers??

I have pretty-much restified the suspension with full poli and heavy duty springs and sway bars front and rear. Lowered springs in the front..

Along with my about 550hp/580T, 496 BBC and M-20/3-31 12-bolt posi. As well as new style tires and wide rims..

Do all I need to make it current is to blow it so it will make 800hp so it will run with the NEW DOGS??

And I do figure that with me in it, it should weigh like less than 3400 pounds so is light, imho..

Hell, I figure that if I make the 325" SBC engine that I will drop say 100 pounds! vs the porky, all iron except for my intake and small headers BBC..

And I am going with something like 500 hp out of my 325" engine way up top!!

pdq67
User avatar
psychomotors
Pro
Pro
Posts: 298
Joined: Sun Apr 27, 2014 8:20 pm
Location: East Bonne Terre
Contact:

Re: my '66/'67 350SS camaro survivor car..

Post by psychomotors »

Drag or corner curving?
Everyone appreciates your honesty , until you're honest with them , then you're an @$$hole.
lefty o
Guru
Guru
Posts: 3445
Joined: Tue Oct 15, 2013 8:50 am
Location:

Re: my '66/'67 350SS camaro survivor car..

Post by lefty o »

i think you really have to define what your after. if you want it to run and drive as well or better than one of the new cars, nothing you listed is going to do it. if you want to outrun one in a straight line, you have some options. if you want to out handle one, youll need more than sway bars.
SupStk
Guru
Guru
Posts: 1913
Joined: Wed Jun 22, 2005 6:25 pm
Location: Box Elder, SD

Re: my '66/'67 350SS camaro survivor car..

Post by SupStk »

pdq67 wrote: Fri Aug 24, 2018 1:46 pm What would it take to make the old SOB run like onne these new 800 hp jobbers??

I have pretty-much restified the suspension with full poli and heavy duty springs and sway bars front and rear. Lowered springs in the front..

Along with my about 550hp/580T, 496 BBC and M-20/3-31 12-bolt posi. As well as new style tires and wide rims..

Do all I need to make it current is to blow it so it will make 800hp so it will run with the NEW DOGS??

And I do figure that with me in it, it should weigh like less than 3400 pounds so is light, imho..

Hell, I figure that if I make the 325" SBC engine that I will drop say 100 pounds! vs the porky, all iron except for my intake and small headers BBC..

And I am going with something like 500 hp out of my 325" engine way up top!!

pdq67
I look at what the factories are producing these days and I'm jealous. The manufactures have done an outstanding job being everything to everybody. The cars start and idle cold, have tuneable suspensions, go crazy fast in turns or straight, has good street manners, make unbelievable gas mileage and still pass EPA certification. They do all that with a warranty.
How does a home builder compete with a 50 year old pony car without losing the essence that makes that old iron so appealing?
Monty Frerichs
B&M Machine
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: my '66/'67 350SS camaro survivor car..

Post by pdq67 »

Drag racing and road course racing.

Heck, back the last time I drove it, it was sprung so tight that I could turn a 90 degree corner due to my stock, quick ratio steering running about 40 mph. It would almost skip sideways. Mostly I throttle steered it..

pdq67
lefty o
Guru
Guru
Posts: 3445
Joined: Tue Oct 15, 2013 8:50 am
Location:

Re: my '66/'67 350SS camaro survivor car..

Post by lefty o »

pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: my '66/'67 350SS camaro survivor car..

Post by pdq67 »

lefty o,

If I was to modify my car that much, I would make a, "Big Red I", clone and be done with it!

https://bigredcamaro.com/

And as far as I am concerned, "Big Red", can go up against ANY and ALL cars in the WORLD!!

But thanks for the link you put up.

pdq67
Post Reply