Switching from power to manual brakes.

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Switching from power to manual brakes.

Post by pdq67 »

Two points here.

1st, remember to install the M/C pushrod in the top hole of the brake pedal when you remove the power stuff. You will probably need to R&R the M/C here so it is in the proper position.

And 2nd, you might look into, "Praise", brake pads and shoes if they are still in business? BUT they might be too pricey for you?

pdq67
rfoll
Guru
Guru
Posts: 3023
Joined: Mon Jan 11, 2010 12:44 pm
Location: St. Helens, OR

Re: Switching from power to manual brakes.

Post by rfoll »

I haven't looked, but I'm hoping the top hole is there.
So much to do, so little time...
User avatar
MadBill
Guru
Guru
Posts: 15024
Joined: Tue Nov 15, 2005 10:41 am
Location: The Great White North

Re: Switching from power to manual brakes.

Post by MadBill »

pdq67 wrote: Mon Jul 16, 2018 2:57 pm Two points here.

1st, remember to install the M/C pushrod in the top hole of the brake pedal when you remove the power stuff. You will probably need to R&R the M/C here so it is in the proper position.

And 2nd, you might look into, "Praise", brake pads and shoes if they are still in business? BUT they might be too pricey for you?

pdq67
The link didn't work for me, but: "For more information, call Praise Dyno Brake at 877-606-7867, or visit www.praisedynobrake.com. "
Felix, qui potuit rerum cognscere causas.

Happy is he who can discover the cause of things.
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Switching from power to manual brakes.

Post by pdq67 »

Thanks Bill.

pdq67
User avatar
af2
Guru
Guru
Posts: 7014
Joined: Sun Jan 28, 2007 4:42 pm
Location: Grass Valley, CA :Northern Foothills

Re: Switching from power to manual brakes.

Post by af2 »

pdq67 wrote: Wed Jul 18, 2018 8:01 am Thanks Bill.

pdq67
And third the Bore on the M/C will need to be around the 3/4" region to get the right amount of pressure.
GURU is only a name.
Adam
User avatar
BigBlockMopar
Momentary Specialist
Momentary Specialist
Posts: 336
Joined: Fri Mar 25, 2016 8:53 pm
Location: Netherlands
Contact:

Re: Switching from power to manual brakes.

Post by BigBlockMopar »

I've ran a set of EBC Yellow Stuff pads on my '73 daily and they had noticable more bite.
They dust the wheels really well too. At least you could see your money go to dust, and where it ended up on where you had to wipe it off again.
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Switching from power to manual brakes.

Post by pdq67 »

One other thing here that I thought I would mention.

A power M/C has a shallow pushrod hole whereas a non-power master cylinder will have a deep pushrod hole.

Just check and make darn sure that your pushrod CAN"T fall out if the master cylinder piston sticks in is all because on a shallow hole power M/C, the vacuum power "can" holds the pushrod in place and the deep hole non-power M/C won't let the pushrod fall out!!! The pushrod is in too deep to fall out regardless...

pdq67
rfoll
Guru
Guru
Posts: 3023
Joined: Mon Jan 11, 2010 12:44 pm
Location: St. Helens, OR

Re: Switching from power to manual brakes.

Post by rfoll »

There was something different about it because the Nova I removed the master from had it spaced out away from the firewall. I guess I should have kept some of the other pieces when I scrapped the car.
So much to do, so little time...
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Switching from power to manual brakes.

Post by pdq67 »

Maybe you are thinking that it was mounted to a, "channel", with a, "wing", on each end of each leg to space it out??? Holes in the wings would allow bolting it to the firewall if not mistaken??

pdq67
rfoll
Guru
Guru
Posts: 3023
Joined: Mon Jan 11, 2010 12:44 pm
Location: St. Helens, OR

Re: Switching from power to manual brakes.

Post by rfoll »

Extra nuts on the studs. The car was built by someone with either very few fabrication skills, no patience or both. The roll cage was frightening to look at.
So much to do, so little time...
Post Reply