Frame notching
Posted: Wed Aug 10, 2016 10:56 pm
Has anyone ever notched the rear frame on 2nd generation camaros and welded sliders in place?
I have caltrac split leafsprings 1500+hp
Caltrac bars, double adjustable shocks, anti roll bar, strange rearend. I need to lower the car 3"to 4"
In the rear and this is the only way I see of accomplishing this goal. Caltrac does not recommend more the 1.5" of lowering blocks, so using 3" lowering blocks is out of the question. ..
I have caltrac split leafsprings 1500+hp
Caltrac bars, double adjustable shocks, anti roll bar, strange rearend. I need to lower the car 3"to 4"
In the rear and this is the only way I see of accomplishing this goal. Caltrac does not recommend more the 1.5" of lowering blocks, so using 3" lowering blocks is out of the question. ..