Caltracs or ladder bars?

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Posts: 379
Joined: Thu Mar 21, 2013 11:03 am
Location: Chancellorsville Battle Field, Chancellorsville, Virginia

Re: Caltracs or ladder bars?

Postby BigBlocksOnTop2 » Thu Jun 30, 2016 3:30 pm

Who are the fastest guys?

Posts: 7499
Joined: Thu Mar 04, 2010 8:05 pm

Re: Caltracs or ladder bars?

Postby pdq67 » Thu Jun 30, 2016 11:33 pm

You can't bend the springs using slapper bars that slap right in the bottom middle of the front spring eye.

Oh, the coil-overs are for adjusting the rear's side to side pre-load, kinda like what air bags do.

But I used mine to also raise my car up so I could mount way bigger tires under her!

At one time, I had 9.50/14 mud and snow tires under my '67 and they were like 29.5" in dia, but narrow. I could barely slide my fingers between the tire and the finders front and rear.

Next were my great big L-60/14's that tape measured a 298/53-14 so weren't anywhere near a 60 tire!


Return to “Chassis / Suspension / Body”

Who is online

Users browsing this forum: No registered users and 2 guests