FATMAN OR LA360

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Post Reply
Trev
Member
Member
Posts: 180
Joined: Mon Jan 24, 2005 7:00 pm
Location: Australia

FATMAN OR LA360

Post by Trev » Tue Jul 26, 2005 10:20 pm

Hey guys
You know of anyone or have you ever fitted a Powerglide into a vk commodore type car.

I just bolted the box up and put the cross member in and its sweet
One problem but is that Im using a BM Pro Ratchet and the bracket the bolts to the oil pan that holds the cable wont fit. There isnt enuff room between the oil pan and the chassis rail on the VK.

I dont wanna just go belting the shit out of the chassis rail so i was hoping that you know or know someone that has done this before and has a good fix.

Trev

la360
Expert
Expert
Posts: 579
Joined: Wed Oct 13, 2004 6:26 am
Location: Melbourne Australia
Contact:

Post by la360 » Sun Jul 31, 2005 12:22 am

I have only Dynoed a few Holden Engines, have very little experience with the cars themselves. I know I was able to flip the little pin for the shifter lever on the trans on my Torqueflite to the other side, and then dropped the bracket down accordingly. You might be able to do something similar. Otherwise, I am not much help .
AL...

Fatman
Expert
Expert
Posts: 985
Joined: Fri Sep 10, 2004 8:30 am

-

Post by Fatman » Sun Jul 31, 2005 9:28 am

Sorry trev

no help here either. maybe try ask on street comm.

Post Reply