SpeedTalk Store - Opinion Columns

Designing a Rear Leaf Spring Suspension to hook & not squat

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby pdq67 » Sun Dec 18, 2016 6:27 pm

Anybody ever figure out a way to use the f/g rear mono-leaf springs off an Astro Van?

I like the idea of a substantial weight savings, at least I think they would be lighter than multi-leafs?

I've had 560 pounds of water softener salt in the rear of our Astro Van so know they are strong enough.

pdq67
pdq67
Guru
Guru
 
Posts: 6737
Joined: Thu Mar 04, 2010 8:05 pm

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby englertracing » Sun Dec 25, 2016 4:52 am

pdq67 wrote:Anybody ever figure out a way to use the f/g rear mono-leaf springs off an Astro Van?

I like the idea of a substantial weight savings, at least I think they would be lighter than multi-leafs?

I've had 560 pounds of water softener salt in the rear of our Astro Van so know they are strong enough.

pdq67



I've heard of street stocks using fiberglass leafs.

How about this?
Torque arm and leaf springs,
I don't like the way they did the birdcages, they will wear out the axles, should have some big ole bushings.
but I like the concept
englertracing
Expert
Expert
 
Posts: 847
Joined: Thu Sep 29, 2011 7:55 am

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby Splitter » Sun Dec 25, 2016 3:56 pm

How about adding half leafs on the front half of the spring, to make the spring stiffer in the front? That should help with axle wrap and squat, i would think.
Splitter
Pro
Pro
 
Posts: 203
Joined: Sat May 31, 2014 10:45 pm
Location: Manitoba

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby midnightbluS10 » Sun Jan 22, 2017 7:26 am

pdq67 wrote:Anybody ever figure out a way to use the f/g rear mono-leaf springs off an Astro Van?

I like the idea of a substantial weight savings, at least I think they would be lighter than multi-leafs?

I've had 560 pounds of water softener salt in the rear of our Astro Van so know they are strong enough.

pdq67


Flex-Form makes fiberglass monoleafs for all sorts of applications. What about those? The Astro leafs have cracking issues. Lots of guys swap to steel. I know there's been issues with guys having aftermarket monos crack, too, but most of what I've seen was all stuff that was 10+ yrs old. There's always the Calvert split monoleaf, too. But it's steel, too, isn't it? Still lighter than an entire spring pack.
midnightbluS10
Member
Member
 
Posts: 66
Joined: Sun Oct 20, 2013 7:41 am

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby TRN » Tue Jan 24, 2017 12:27 pm

TRN
Member
Member
 
Posts: 157
Joined: Thu Nov 09, 2006 3:30 pm
Location: Quincy, WA

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby pdq67 » Fri Mar 03, 2017 6:36 pm

How is this thread going?

Anyway, back right out of HS, about '66 or so I knew a guy that had a long bed 1/2 ton Ford with a 427 engine with 2x4's on it. He had a 4-speed and I think a posi- under his truck.

I forget how he did it, but he used 1/2" log chains such that when the rear end tried to wrap, it couldn't and the truck would pretty-much stand right up!!

I wish that I remembered more about his truck, sorry.

pdq67
pdq67
Guru
Guru
 
Posts: 6737
Joined: Thu Mar 04, 2010 8:05 pm

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby Brian P » Fri Mar 03, 2017 7:05 pm

Could use a chain as a half-arse upper control arm ... tie it between the top of the diff housing somehow and the frame of the vehicle somewhere ahead of the axle. Redneck (and probably rattly) but it might just work!
Brian P
Guru
Guru
 
Posts: 1138
Joined: Wed Jan 02, 2008 7:35 pm
Location: Toronto, Ontario, Canada

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby Seanh832 » Fri Mar 17, 2017 12:52 am

Cal Tracs , Ladder bars or pre-loaded Traction bars will stop it from squating.
Maintenance Machinist for Anheuser-Busch
Seanh832
Member
Member
 
Posts: 186
Joined: Thu Oct 17, 2013 9:00 am
Location: Houston, Texas

Re: Designing a Rear Leaf Spring Suspension to hook & not sq

Postby Bob Hollinshead » Thu Apr 20, 2017 8:21 pm

Alan Roehrich wrote:We used a "leaf link", which was basically a 4 link that used the leaf spring as the lower link, and a large tube adjustable upper bar and brackets, equal in length to the spring, from the center of the axle to the front spring eye. We also used the biggest shocks, with the stiffest compression valving we could find.


Alan, if I understand this right you made an upper bar that attached above the axle tube housing at the center line of the axle and the other end shared the same mount as the front spring eye? I've also considered a longer leaf setup but the longer the length the more chance of leaf spring wrap up. I think caltrack bars must rely on some front spring bending for their system to work.
Pro question poster.
Bob Hollinshead
Guru
Guru
 
Posts: 1236
Joined: Thu Feb 07, 2008 1:32 pm

Previous

Return to Chassis / Suspension / Body

Who is online

Users browsing this forum: No registered users and 2 guests