Who are "the best cylinder head people" that are working on your ports?
Has the research done extended to track results yet?
experience with BG 3-valve sbc yet?
Moderator: Team
-
Speedy Goomba
- Member
- Posts: 60
- Joined: Sun Nov 14, 2004 4:12 pm
- Location: Hamilton NJ
- Contact:
-
Doug Schriefer
- Expert
- Posts: 867
- Joined: Tue Jan 18, 2005 2:46 pm
- Location: Lake Lanier, GA
We are not able to release the names of some of the people we're currently working with on this project at this point. We have not completed track testing yet. Once we're closer to release we'll release the testing data.
Last edited by Doug Schriefer on Thu Jan 20, 2005 6:14 pm, edited 1 time in total.
Doug Schriefer
-
Guest
You have the tough job, don't you Tech @ BG?Tech @ BG wrote:We are not able to release the names of some of the people we're currently working with on this project at this point. We have not completed track testing yet. Once we closer to release we'll release the testing data.
Still in development, no flow numbers, can't tell us who's working on them, or any test results, etc. It reminds me of computer software "releases" we've seen in the past. Hofstadter's Law applies also to aftermarket engine parts.
Good luck with this project.