New Ford Intake Manifold under development

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
Kenny M
Member
Member
Posts: 82
Joined: Sun Mar 24, 2013 12:31 pm
Location:

Re: New Ford Intake Manifold under development

Post by Kenny M »

graph.jpg
You do not have the required permissions to view the files attached to this post.
Top
JoePorting
Guru
Guru
Posts: 2997
Joined: Mon Jun 14, 2010 3:16 pm
Location: Lake Elizabeth, CA

Re: New Ford Intake Manifold under development

Post by JoePorting »

Nice numbers. 😀

Would be interesting to see what a 2" spacer would do.
Joe Facciano
Top
427dart
Expert
Expert
Posts: 910
Joined: Thu Apr 02, 2015 3:23 pm
Location:

Re: New Ford Intake Manifold under development

Post by 427dart »

Can you make up one like this for the Ford 351W 9.5 deck? 427 FE Tunnel Wedge pictured
You do not have the required permissions to view the files attached to this post.
Top
Fatman
Guru
Guru
Posts: 1081
Joined: Fri Sep 10, 2004 8:30 am
Location:

Re: New Ford Intake Manifold under development

Post by Fatman »

Kenny M wrote: ↑Sat Jun 15, 2019 11:11 am #4 Head. Note.. I added a quart and lowered vacuum and oil pressure came back on the top. Did not pull it past 8100.

NO4.jpg
#4 Head? Scott cooks 4v heads?
Top
Scott
Member
Member
Posts: 95
Joined: Tue May 03, 2005 4:00 am
Location: Australia

Re: New Ford Intake Manifold under development

Post by Scott »

Fatman wrote: ↑Mon Jun 17, 2019 5:04 am
Kenny M wrote: ↑Sat Jun 15, 2019 11:11 am #4 Head. Note.. I added a quart and lowered vacuum and oil pressure came back on the top. Did not pull it past 8100.

NO4.jpg
#4 Head? Scott cooks 4v heads?
Yes my stock appearing 4V cylinder head casting .
Ken thanks for posting the results .
Video sounds great Ken
Top
Fatman
Guru
Guru
Posts: 1081
Joined: Fri Sep 10, 2004 8:30 am
Location:

Re: New Ford Intake Manifold under development

Post by Fatman »

Scott wrote: ↑Mon Jun 17, 2019 6:44 am
Fatman wrote: ↑Mon Jun 17, 2019 5:04 am
Kenny M wrote: ↑Sat Jun 15, 2019 11:11 am #4 Head. Note.. I added a quart and lowered vacuum and oil pressure came back on the top. Did not pull it past 8100.

NO4.jpg
#4 Head? Scott cooks 4v heads?
Yes my stock appearing 4V cylinder head casting .
Ken thanks for posting the results .
Video sounds great Ken
Whats the minimum intake port area on those heads?

Do you have any pics or details of the "2017 new racing heads" you have on your website? No pics come up for me.
Top
Post Reply

Return to “Engine Tech”