G'day Mates,
have a 350 chevy about to go in the hone cab.
customer will be using SCE titan headgaskets...2 layers of copper with stainless wire inbetween to act as the fire ring.
can I use an MLS gasket as the plate gasket, or am I just wasting my time?
customer is not interested in purchasing a second set of SCE's for the plate work.
not sure exactly what to do?? plate it with an MLS, plate it with a conventional gasket, plate it with no gasket, don't plate it at all.
intended use for engine is 15 psi of boost and a 200 shot of spray at the dragstrip.
please advise
tq plating 350 chevy/SCE titan gaskets
Moderator: Team
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location: