tq plating 350 chevy/SCE titan gaskets

[bentvalves]

G'day Mates,

have a 350 chevy about to go in the hone cab.

customer will be using SCE titan headgaskets...2 layers of copper with stainless wire inbetween to act as the fire ring.

can I use an MLS gasket as the plate gasket, or am I just wasting my time?

customer is not interested in purchasing a second set of SCE's for the plate work.

not sure exactly what to do?? plate it with an MLS, plate it with a conventional gasket, plate it with no gasket, don't plate it at all.

intended use for engine is 15 psi of boost and a 200 shot of spray at the dragstrip.

please advise