Anybody have a good source for PSI springs JHE- 10A and JHE-002 retainers
Thanks Ron
PSI valve springs
Moderator: Team
-
- Member
- Posts: 96
- Joined: Fri Apr 06, 2007 4:59 pm
- Location: St. Charles, MO
- Contact:
Re: PSI valve springs
Summit actually stocks and sells some of the PSI spring sets.
As for your area, give PSI a call and they will direct you to a few sellers in your area.
As for your area, give PSI a call and they will direct you to a few sellers in your area.
The Older I Get, The Dumber I Get
-
- Expert
- Posts: 816
- Joined: Fri May 18, 2007 6:46 pm
- Location: Crane, Texas
- Contact:
-
- Expert
- Posts: 994
- Joined: Sun Mar 21, 2010 9:48 pm
- Location: Somewhere, Alaska
- Contact:
Re: PSI valve springs
Call PSI directly. They are great to deal with and will put you in contact with a retailer they recommend. I did and they even gave me a discounted price. Nice folks.
Mark Goulette
Owner/Driver of the Livin' The Dream rear engine dragster
Speed kills but it's better than going slow!
http://www.livinthedreamracing.com
Authorized Amsoil Retailer
Owner/Driver of the Livin' The Dream rear engine dragster
Speed kills but it's better than going slow!
http://www.livinthedreamracing.com
Authorized Amsoil Retailer
Re: PSI valve springs
X2 On Ken @ MSU. 216-390-4561
Pete Graves
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
-
- Pro
- Posts: 287
- Joined: Wed Sep 03, 2014 2:01 am
- Location:
Re: PSI valve springs
Those JHE PN's are only available from Hornick, the springs are exclusive designs made for JHE by PSI.winterhoff wrote: ↑Thu Dec 06, 2018 6:40 pm Anybody have a good source for PSI springs JHE- 10A and JHE-002 retainers
Thanks Ron
I believe you will have to buy the springs from Joe. May be able to source a compatible retainer through DW or Xceldyne.
If you go to his website, find the valve spring spec page and scroll to the bottom for the JHE #'s.
JHE contact (704)664-7322 jheinc.com
Re: PSI valve springs
Correct, ask for Rick @ JHE Inc.Charliesauto wrote: ↑Sun Dec 09, 2018 5:19 pmThose JHE PN's are only available from Hornick, the springs are exclusive designs made for JHE by PSI.winterhoff wrote: ↑Thu Dec 06, 2018 6:40 pm Anybody have a good source for PSI springs JHE- 10A and JHE-002 retainers
Thanks Ron
I believe you will have to buy the springs from Joe. May be able to source a compatible retainer through DW or Xceldyne.
If you go to his website, find the valve spring spec page and scroll to the bottom for the JHE #'s.
JHE contact (704)664-7322 jheinc.com