need opinions on 598 cam
Moderator: Team
Re: need opinions on 598 cam
I think your way short on lift with either option for the CI and the RPM you want to run. 1100 is a pipe dream with those components, 112% VE with that CI is no cake walk.
Pete Graves
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
-
- Pro
- Posts: 461
- Joined: Sun Feb 13, 2005 11:27 am
- Location:
Re: need opinions on 598 cam
I would keep 2.3 not because of engine size; I would't change valve size till I size the port for the larger valve starting with the throat and going to intake gasket.