Ball socket exhaust couplers.
Moderator: Team
Ball socket exhaust couplers.
Anybody have a source for 3.5in in/out? Or can fabricate the female end with 2 bolt flange.
Re: Ball socket exhaust couplers.
I inquired about those. Probably the same as my existing Flowmaster set. Apparantly Dr.Gas had them at one time too.
those are adaptors going from a 3.5" round to a 3" ball / cone connection
those are adaptors going from a 3.5" round to a 3" ball / cone connection
-
- HotPass
- Posts: 1862
- Joined: Sun Mar 01, 2009 2:42 am
- Location: The Seasonally Frozen Wastelands
-
- Guru
- Posts: 2650
- Joined: Sun Sep 05, 2004 6:38 pm
- Location: salt lake city, ut
- Contact:
Re: Ball socket exhaust couplers.
---Boyd Butler has been Dr.Gas---but he closed up his business just recently.
---I don't know for sure about the Spintech business---but I think Boyd originally came up with spintech muffers.
-----------------------------------------------------------
---this link is Boyd's farewell message
http://www.drgas.com/
---I don't know for sure about the Spintech business---but I think Boyd originally came up with spintech muffers.
-----------------------------------------------------------
---this link is Boyd's farewell message
http://www.drgas.com/
Re: Ball socket exhaust couplers.
I looked for the same thing. I found that semi's use them, or use to. I found a part number on line, but had a real hard time finding someone that could get the part.
A bad day of racing is better than a good day of work
-
- HotPass
- Posts: 1862
- Joined: Sun Mar 01, 2009 2:42 am
- Location: The Seasonally Frozen Wastelands
Re: Ball socket exhaust couplers.
V-clamps work great...except for the broken clamps because the stainless nut galls the stainless stud, and then the nut seizes and the stud breaks.
Install a brass nut, or use a heap of anti-seize.
Install a brass nut, or use a heap of anti-seize.