HEADERS

GUEST · Post by **GUEST** » Fri Dec 24, 2004 7:56 pm

I HAVE A 69 CAMARO THAT I RUN IN AN ALL MOTOR 10'' TIRE CLASS CAR WEIGHS 3400 WITH THIS COMBO 565 BBC 24 DEGREE 370 DART OVAL PORTS HEADS FLOW 430 IN 330 EX @ 800 LIFT;14.5 TO 1 PISTONS ;ALUM RODS;BULLET CAM;807/775 LIFT ;283/293 @ 50DUR ON A 114 LS 1150 CARB ;180 GEAR POWERGLIDE 5800 CONV;456 GEAR 28'' TIRES. I HAVE A SET OF LEMONS HEADERS 2 1/8 TO 2 1/4 4'' MERGE COLLECTORS WHAT DO YOU THANK OF THIS COMBO . WILL THIS HEADERS BE OK OR TO SMALL ALSO ANY FEEDBACK ON THESE HEADS. THANKS GUEST.

speedtalk · Post by **speedtalk** » Tue Dec 28, 2004 7:08 pm

This engine is so far out of my experience range, but on thing to keep in mind. If the car is going to have traction issues, you may want to test larger headers than you would normally use to help soften the bottom end.