Does anyone know of a valve seal....
Moderator: Team
Does anyone know of a valve seal....
...for a 7mm stem, .530" guide?
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: Does anyone know of a valve seal....
My guess would be check with Del West or talk to Ferrera.
The Older I Get, The Dumber I Get
Re: Does anyone know of a valve seal....
Thanks, I'll check with them.
Some idiot, not naming names, but his initials are Brent Lykins, ordered custom valve guides for some FE heads that I can't find seals for.
They are exhaust valves though, so I'm gonna see what options I have on the table.
Some idiot, not naming names, but his initials are Brent Lykins, ordered custom valve guides for some FE heads that I can't find seals for.
They are exhaust valves though, so I'm gonna see what options I have on the table.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: Does anyone know of a valve seal....
Can you machine it to .500” or smaller ?
This is about the best selection if you haven’t looked already...
http://usseal-eok.com/seals-by-size.htm ... em_size=19
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit
Re: Does anyone know of a valve seal....
Yes, that was next option if I couldn’t find something readily available.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
-
- Pro
- Posts: 234
- Joined: Fri Sep 26, 2008 12:00 am
- Location: Northeastern PA
Re: Does anyone know of a valve seal....
Not sure if its the style your looking for but based on dimensions supplied SBI shows a 122-1357 or 122-1358 will work up to a .531 guide
http://www.sbi-e-catalog.com/PartDetail ... em%20Seals
http://www.sbi-e-catalog.com/PartDetail ... em%20Seals
They are both in stock at either Liberty or PBM
Re: Does anyone know of a valve seal....
Joe, I’ll give them a shot. Thanks a lot for the legwork.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: Does anyone know of a valve seal....
Those seals work. Picked some up today at warehouse.
Thanks again!
Thanks again!
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
-
- Pro
- Posts: 234
- Joined: Fri Sep 26, 2008 12:00 am
- Location: Northeastern PA