New Scott Cook Iron cleveland

[Steve.k]

https://m.facebook.com/story.php?story_ ... n__=%2As-R. This looks interesting for us cleveland gearheads!!

[scott woodward]

Do you have any details?
Flow figures port sizes or valve sizing?
Should be a nice head going off his precious work.

[Steve.k]

Not yet. But if they are like his race alloy head we will have a serious iron head. Says he has 5 port configurations.

[smeg]

I have 2 here now, just about to cnc port them, trust me they are probably the best iron head I have ever seen. The casting is perfect and the work that has been put into the water jacket design is unreal.

[Steve.k]

We are just getting ready to pour Trackboss cast blocks. Should be a perfect match.Will you be able to give some data later?

[midnightbluS10]

Newest post on their Facebook says 3-4 more months until they're available there. Same port and chamber configurations as his aluminum head. No pricing yet.

https://www.facebook.com/35041996508290 ... 546815168/

[smeg]

We are just getting ready to pour Trackboss cast blocks. Should be a perfect match.Will you be able to give some data later?

Sure no problem, what sort of data are you after?

[Steve.k]

Port volume and valve size. Combustion chamber.

[cjperformance]

Port volume and valve size. Combustion chamber.

+mcsa please

[Steve.k]

Lol yes mcsa

[smeg]

OK,
the first port we are putting in this is the basic head port, we have lots of different raised runner heads and larger ports that will go into this casting.
I can tell you it looks fantastic but they sure do take some cutting time in iron.
min csa 2.87
avge. csa 3.12
chamb vol. 59.5
Flow 344+
2.19 int 1.625 ex
PM me and I can send some pics of the CAD water jacket design.

[smeg]

Sorry, forgot to add these ports were designed by Darin Morgan.