Need wiring for Motorola tach
Moderator: Team
-
- Expert
- Posts: 635
- Joined: Tue May 24, 2005 10:45 pm
- Location: Los Angeles, in The People's republic of Kalifornia
Need wiring for Motorola tach
I have a Motorola low rpm tach that i need a wiring diagram for. The part no. is 7ATH24042. It goes up to 40000rpm and it also has an hour meter. It might be for a boat or 18 wheeler. One of the threaded studs is PI, another is B+, GND, SIG. It also has 2 wires coming out, 1 is Brown, another is Yellow. I hooked up power to B+, ignition tach wire to SIG, and ground to GND.Nothing happened. A sticker says ALT/HOUR/TACH. I'm wondering if one of those wires also has to be hooked up with power in order for it to work.
-
- Pro
- Posts: 214
- Joined: Sun Apr 20, 2014 11:07 pm
- Location:
Re: Need wiring for Motorola tach
That's real funny there. 40,000 rpm is low rpm? Sorry, couldn't resist.sc2dave wrote: ↑Thu Oct 18, 2018 11:51 pm I have a Motorola low rpm tach that i need a wiring diagram for. The part no. is 7ATH24042. It goes up to 40000rpm and it also has an hour meter. It might be for a boat or 18 wheeler. One of the threaded studs is PI, another is B+, GND, SIG. It also has 2 wires coming out, 1 is Brown, another is Yellow. I hooked up power to B+, ignition tach wire to SIG, and ground to GND.Nothing happened. A sticker says ALT/HOUR/TACH. I'm wondering if one of those wires also has to be hooked up with power in order for it to work.
I would try to Google it or contact Motorola themselves for this info. Sounds like it may be an aircraft gauge with the ALT being for altitude.
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: Need wiring for Motorola tach
Your playing with Fire there!
Don't assume that because nothing happened when you hooked it that you did not harm any semiconductors that may be in the Tach!
Don't assume that because nothing happened when you hooked it that you did not harm any semiconductors that may be in the Tach!
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
- Pro
- Posts: 274
- Joined: Sun Jan 14, 2007 11:47 am
- Location:
Re: Need wiring for Motorola tach
It uses the alternator output as a signal to make it functional and is calibrated to the specific alternator
Seems like a hopefully inexpensive paperweight
Link attached for general info
https://youtu.be/pdkFqAsAcgY
Thanks
Dave B.
Seems like a hopefully inexpensive paperweight
Link attached for general info
https://youtu.be/pdkFqAsAcgY
Thanks
Dave B.
LIGHT 'EM UP