Does anybody here know anything about these? I just stumbled across these but have never heard of them.
http://www.libertyperformance.com/produ ... hamber.php
Liberty cylinder heads?
Moderator: Team
-
- Pro
- Posts: 234
- Joined: Fri Sep 26, 2008 12:00 am
- Location: Northeastern PA
Re: Liberty cylinder heads?
I used 1 set of those on a mild 351W for an old pickup truck.
249cfm @ .600 lift intake, 146 @ .600 lift exhaust on my superflow bench
Ex port stalls at .400 and never recovers.
China casting but light years ahead of a pro comp / speedmaster.
You'll have to touch up the guides and valve job just like any other head you buy.
249cfm @ .600 lift intake, 146 @ .600 lift exhaust on my superflow bench
Ex port stalls at .400 and never recovers.
China casting but light years ahead of a pro comp / speedmaster.
You'll have to touch up the guides and valve job just like any other head you buy.
-
- Guru
- Posts: 1649
- Joined: Tue Mar 06, 2007 7:23 pm
- Location: San Tan Valley, AZ
- Contact:
-
- Pro
- Posts: 234
- Joined: Tue May 03, 2005 9:22 pm
- Location: Arizona
Re: Liberty cylinder heads?
Liberty sells castings imported through Proheader I believe as well as other importers.
The castings are a Dart platinum reproduction.
I have been buying from Proheader for at least five years. The heads work well.
The castings are a Dart platinum reproduction.
I have been buying from Proheader for at least five years. The heads work well.
Re: Liberty cylinder heads?
That’s good to know. I’ve been eyeballing some of Eric Weingartner’s budget ported Proheader heads for a relatively low buck 408w I’m putting together.blwilliams wrote: ↑Thu Oct 18, 2018 1:22 am Liberty sells castings imported through Proheader I believe as well as other importers.
The castings are a Dart platinum reproduction.
I have been buying from Proheader for at least five years. The heads work well.
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: Liberty cylinder heads?
How deep are the seats and are they interlocking?
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
- Pro
- Posts: 234
- Joined: Tue May 03, 2005 9:22 pm
- Location: Arizona
Re: Liberty cylinder heads?
Here is my ad on craigslist here in Phoenix.
https://phoenix.craigslist.org/evl/pts/ ... 22756.html
Yes the seats interlock. When I get out in the garage I will measure the depth of the seat. They look like any other name brand seat.
If your wondering about the name Bruco Performance, people are real funny when they don't recognise the name of the manufacture.
When I advertised the heads as Proheader no one was interested. Once I changed the name to mine I have had much more success selling heads.
https://phoenix.craigslist.org/evl/pts/ ... 22756.html
Yes the seats interlock. When I get out in the garage I will measure the depth of the seat. They look like any other name brand seat.
If your wondering about the name Bruco Performance, people are real funny when they don't recognise the name of the manufacture.
When I advertised the heads as Proheader no one was interested. Once I changed the name to mine I have had much more success selling heads.