I haven’t found much coverage for the “REC”. I received an email yesterday with a link to this brief write up.
More coverage is promised for the November issue of “Engine Builder Magazine “
http://www.enginebuildermag.com/2018/10 ... yno-champ/
“REC” coverage
Moderator: Team
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: “REC” coverage
Do you have a Facebook account? He (Greg) created a Facebook page for it and has lots of pics and updates were posted there. I went for the technical conference (did not compete in shootout) and thought it was great, especially for the first attempt. Some delays getting engines on/off the dyno but all in all well done.
Chris
Chris
Christopher Racing Engines
Roanoke Rapids, NC 27870
252-578-8273
Roanoke Rapids, NC 27870
252-578-8273
-
- Guru
- Posts: 6385
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: “REC” coverage
What is the Facebook link ?cnsperf wrote: ↑Mon Oct 15, 2018 9:50 am Do you have a Facebook account? He (Greg) created a Facebook page for it and has lots of pics and updates were posted there. I went for the technical conference (did not compete in shootout) and thought it was great, especially for the first attempt. Some delays getting engines on/off the dyno but all in all well done.
Chris
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: “REC” coverage
I had looked for this before and didn't find much. This page has photos and videos
https://m.facebook.com/Race-Engine-Chal ... 320063226/
https://m.facebook.com/Race-Engine-Chal ... 320063226/
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit