EMC

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Walter R. Malik
Guru
Guru
Posts: 4062
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: EMC

Post by Walter R. Malik » Sun Oct 07, 2018 8:17 pm

GARY C wrote:
Fri Oct 05, 2018 4:56 pm
I thought Traditional were all old school engines? I hope they do a good write up on at least the top 3.
Had to run a 4 barrel carb but, not necessarily "Old School".
http://www.rmcompetition.com
Specialty engine building at its finest.

midnightbluS10
Expert
Expert
Posts: 519
Joined: Sun Oct 20, 2013 8:41 am

Re: EMC

Post by midnightbluS10 » Sun Oct 07, 2018 9:59 pm

GARY C wrote:
Fri Oct 05, 2018 4:56 pm
I thought Traditional were all old school engines? I hope they do a good write up on at least the top 3.
Pretty sure that's what "Vintage" class is for. Why have 2 classes with 2 different names and the same rules?
JC - Precision Guesswork & Expert Up Arrow Manipulation

GARY C
Guru
Guru
Posts: 4757
Joined: Tue May 14, 2013 10:58 pm

Re: EMC

Post by GARY C » Mon Oct 08, 2018 3:44 am

Walter R. Malik wrote:
Sun Oct 07, 2018 8:17 pm
GARY C wrote:
Fri Oct 05, 2018 4:56 pm
I thought Traditional were all old school engines? I hope they do a good write up on at least the top 3.
Had to run a 4 barrel carb but, not necessarily "Old School".
I see, thanks.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBER AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!

Barry_R
Guru
Guru
Posts: 1225
Joined: Wed Jan 18, 2006 8:57 pm
Location: Detroit area
Contact:

Re: EMC

Post by Barry_R » Tue Oct 09, 2018 9:29 am

We had five guys drop out in total out of twenty-one total accepted entries. That seems to be pretty typical as life and last minute engine damage during testing happens. Since this was a first time effort for the venue at JE, I do not think they would have wanted too many more entries in any case. Takes some time to refine the quick load and unload process for this wide a variety of engines.
Survival Motorsports
www.survivalmotorsports.com

WD for Comp, Manley, Blue Thunder, Diamond
Probe, Holley, Clevite, Federal-Mogul, Scat....

piston guy
Expert
Expert
Posts: 835
Joined: Mon Sep 10, 2012 1:55 pm
Location: Anaheim, CA

Re: EMC

Post by piston guy » Tue Oct 09, 2018 12:47 pm

Congrats to Scott Main. Glad to have helped you on it.

Post Reply