General engine tech -- Drag Racing to Circle Track
- Posts: 3826
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
Belgian1979 wrote: ↑
Sat Oct 06, 2018 2:05 pm
Stan Weiss wrote: ↑
Thu Oct 04, 2018 10:54 am
I would be interested if anyone else did these calculations what they come up with.
Bore = 4.155"
Stroke = 3.5"
Rod = 6"
IVC = 76 ABDC (36/76 - 292 seat-to-seat - 110 ICL)
VE = 100%
cylinder pressure around 47.1" hg @ IVC
What is the projected compression pressure ?
About 407 psi / 828.5" hg
Stan Weiss / World Wide Enterprises
Offering Performance Software Since 1987
Do you use engine simulation software that uses cylinder head flow files?
We have a package of more than 3025 DFW or FLW Files
- Posts: 1352
- Joined: Tue Mar 06, 2007 7:23 pm
- Location: Torrance, CA
Caprimaniac wrote: ↑
Sat Oct 06, 2018 2:53 am
Mark, you don’t have a video of that engine in the hoist, do you?
Luckily, that was before the cell phone was invented.
- Posts: 925
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
Well dad gum Mark don't leave us wondering-------WHAT happened with the cranked engine on the engine hoist....
- Posts: 14048
- Joined: Tue Nov 15, 2005 10:41 am
- Location: The Great White North
I'd guess the torque reaction when the throttle was blipped, or even just when it fired if the throttle was partially open, flipped over the hoist.
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.