I was just told, I would be speaking at 3pm on Friday Oct. 5th, but that's subject to change.Warp Speed wrote: ↑Fri Aug 10, 2018 12:35 pm
Well, now that you mentioned it............ hahaha
I think that place is about 5 minutes from my house. Thought I might swing by and check it out at some point.
Giving a talk on cam selection, and need your input
Moderator: Team
Re: Giving a talk on cam selection, and need your input
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: Giving a talk on cam selection, and need your input
Someone else will be giving a talk on valve train dynamics, so I probably will stay away from that topic.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
-
- Guru
- Posts: 9633
- Joined: Tue Nov 27, 2007 9:27 am
- Location: Chicago
- Contact:
Re: Giving a talk on cam selection, and need your input
Cam shaft lobe derivatives; their purpose and function.
Designing cam lobes for intake vs exhaust. NA vs forced induction.
A camshaft parameter sensitivity analysis; which parameters are most critical?
Designing cam lobes for intake vs exhaust. NA vs forced induction.
A camshaft parameter sensitivity analysis; which parameters are most critical?
Re: Giving a talk on cam selection, and need your input
I ended up having people write down their questions, and I tried to answer them the best I could.
It could of gone better. My mind wasn't 100%.
My wife fell down the stairs on Wednesday night, and we spent that night at the hospital. By the time I had to speak on Friday, I was extremely tired.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: Giving a talk on cam selection, and need your input
That's a scary deal. I hope everything turned out ok.
Re: Giving a talk on cam selection, and need your input
Sorry to hear that Mike hope she'll be OK.
Jim
Re: Giving a talk on cam selection, and need your input
She'll be fine. She'll be sore for a while, but no lasting damage.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: Giving a talk on cam selection, and need your input
Glad to hear she will be fine. And Kudos to you for soldiering through the best you could. Was there any question that someone asked, that you found interesting or surprising?
Re: Giving a talk on cam selection, and need your input
Glad to hear it, Mike.
He who is in me is greater than he who is in the world.
-
- Guru
- Posts: 1264
- Joined: Fri Feb 26, 2010 11:15 am
- Location: Gold Canyon, AZ
Re: Giving a talk on cam selection, and need your input
For future reference - leave the popcorn machine at home, begin with some of the basics of cam design then, before everyone falls asleep, discuss some of the advanced information such as "snap, crackle, pop", jerk, etc.
Bill
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Re: Giving a talk on cam selection, and need your input
I didn't bring the popcorn machine. Maybe I should have.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449