Sb2 specs versus sb2.2, midget motors
Moderator: Team
-
Dave Koehler
- Vendor
- Posts: 7207
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: Sb2 specs versus sb2.2, midget motors
.2
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
-
hoffman900
- HotPass
- Posts: 3466
- Joined: Sat Feb 23, 2013 5:42 pm
- Location:
Re: Sb2 specs versus sb2.2, midget motors
On the Midget engine, is the block same between the two?
See this thread: http://www.speedtalk.com/forum/viewtopic.php?t=2100
See this thread: http://www.speedtalk.com/forum/viewtopic.php?t=2100
-Bob
-
Walter R. Malik
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: Sb2 specs versus sb2.2, midget motors
If I remember correctly the blocks are different in the lifter bore placement. The later 2.2 blocks have lifter bores which are on different angles like a big block Chevrolet.hoffman900 wrote: ↑Sun Aug 05, 2018 5:48 pm On the Midget engine, is the block same between the two?
See this thread: http://www.speedtalk.com/forum/viewtopic.php?t=2100
A regular block OR a 2.2 block can be fitted with those heads.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
-
englertracing
- Guru
- Posts: 1547
- Joined: Thu Sep 29, 2011 8:55 am
- Location:
Re: Sb2 specs versus sb2.2, midget motors
Gaerte? Blocks are the same. The Ford Gaerte is machined with different bore spacing and head bolt holes but the casting is the same