Making a 400 stock SBC live.
Moderator: Team
-
engineguyBill
- Guru
- Posts: 1264
- Joined: Fri Feb 26, 2010 11:15 am
- Location: Gold Canyon, AZ
Re: Making a 400 stock SBC live.
Paul, spend your money wisely - start out with an aftermarket block. 4.185" bore, 3.250 stroke for one of your ultra-high RPM projects.
Bill
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
-
grandsport51
- Pro
- Posts: 274
- Joined: Sun Jan 14, 2007 11:47 am
- Location:
Re: Making a 400 stock SBC live.
Hey Paul Just install a turbo LQ9 run 8s
And call no popping hoods and your good did a couple in Fl. And they honked https://www.dragzine.com/news/lq9-turbo ... with-ease/
Dave
Sorry for off topic!
And call no popping hoods and your good did a couple in Fl. And they honked https://www.dragzine.com/news/lq9-turbo ... with-ease/
Dave
Sorry for off topic!
LIGHT 'EM UP
Re: Making a 400 stock SBC live.
Need to read this as an idea of what it takes to make 60 psi boost and 2500 hp from a Gen 1 type engine for land speed racing, other words not a 6 second hand grenade...Ignore the piston adds The new engine is LS based........
http://blog.diamondracing.net/inside-te ... -ls-engine
http://blog.diamondracing.net/inside-te ... -ls-engine
Motorcycle land speed racing... wearing animal hides and clinging to vibrating oily machines propelled by fire