Page 1 of 2
Is This Cam Safe To Use?
Posted: Wed Jul 25, 2018 2:37 pm
by Blown & Injected
The cam is fine except for this one spot on the base of a lobe. It seems like a defect in the metal - it is not a rust spot. I have not yet inspected the roller lifter that was riding on that lobe. I am also nervous about reusing the roller lifters on a new cam.
The new parts were installed about 10 years ago and the car has been sitting for a couple of years and then maybe just a couple of tanks of gas per year. So not used much but not new either.
Thanks for taking a look.
Re: Is This Cam Safe To Use?
Posted: Wed Jul 25, 2018 2:44 pm
by rp930
Looks like the start of a bigger problem. Personally I would not.
Re: Is This Cam Safe To Use?
Posted: Wed Jul 25, 2018 3:03 pm
by Frankshaft
I agree, that's just going to start opening up as.it runs. I am assuming a hydraulic roller by the looks of the lobe, and it's a cast core
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 3:04 pm
by Blown & Injected
update:
Machine shop said it looks like a stain from something dripping on it and because it is on the back side, it will be fine...But he just glanced at it. Blow up a pic and it looks like it will open up - I got a new cam....now if I could only find an engine cam plug for the back of the block
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 3:32 pm
by Jim2527
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 4:04 pm
by Newold1
NO ! X2
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 4:21 pm
by lefty o
thats not a stain. run your fingernail over it, you'll feel it.
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 4:24 pm
by F-BIRD'88
I'd retire that one to the pile.
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 5:33 pm
by rp930
Man Cave art.
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 9:01 pm
by ProPower engines
.Thanks for taking a look.
[/quote]
NO
Just toss it in the scrap bin. Its had its time. No point taking a chance your self put it on ebay some low dollar claimer guy will use it for a nite no big deal there.
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 9:34 pm
by modok
Stone it and run it.
What could go wrong, it's the base circle
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 9:55 pm
by af2
modok wrote: ↑Thu Oct 04, 2018 9:34 pm
Stone it and run it.
What could go wrong, it's the base circle
Hmm with how much pressure?
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 10:03 pm
by sc2dave
lefty o wrote: ↑Thu Oct 04, 2018 4:21 pm
thats not a stain. run your fingernail over it, you'll feel it.
Heck, i could feel it on my screen!! Just Kidding!
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 10:04 pm
by af2
sc2dave wrote: ↑Thu Oct 04, 2018 10:03 pm
lefty o wrote: ↑Thu Oct 04, 2018 4:21 pm
thats not a stain. run your fingernail over it, you'll feel it.
Heck, i could feel it on my screen!! Just Kidding!
ME to!!
Re: Is This Cam Safe To Use?
Posted: Thu Oct 04, 2018 10:40 pm
by lefty o
modok wrote: ↑Thu Oct 04, 2018 9:34 pm
Stone it and run it.
What could go wrong, it's the base circle
plenty will go wrong. i wouldnt put that in a lawn mower.