marine flywheels steel or cast?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
rewguy
Expert
Expert
Posts: 954
Joined: Mon Jun 12, 2006 2:45 am
Location:

marine flywheels steel or cast?

Post by rewguy »

just curious.
pamotorman
Guru
Guru
Posts: 2802
Joined: Thu Mar 06, 2014 11:55 pm
Location:

Re: marine flywheels steel or cast?

Post by pamotorman »

you don't want anything in a boat that can come apart and put a hole in the bottom :D
roc
Expert
Expert
Posts: 502
Joined: Sun Sep 02, 2012 9:41 pm
Location: Columbus, IN

Re: marine flywheels steel or cast?

Post by roc »

pamotorman wrote: Fri Jul 13, 2018 10:18 am you don't want anything in a boat that can come apart and put a hole in the bottom :D
Or can hurt babes sunbathing on the deck. :D
Walter R. Malik
Guru
Guru
Posts: 6340
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: marine flywheels steel or cast?

Post by Walter R. Malik »

rewguy wrote: Fri Jul 13, 2018 9:10 amjust curious.
Most factory marine flywheels are cast Nodular Iron.
http://www.rmcompetition.com
Specialty engine building at its finest.
Post Reply