If It is a daily drive.. just run it. If this is a very aggressive racing piece. Fix it.
Epoxy to fix excessive bowl cut
Moderator: Team
Re: Epoxy to fix excessive bowl cut
Re: Epoxy to fix excessive bowl cut
If I was to pull the seat out I would weld it up and do it proper but it is not worth it on this head.
Thanks for the help guys.
Thanks for the help guys.
Re: Epoxy to fix excessive bowl cut
How much horsepower is being lost from a bowl/seat ridge in the wrong flow direction? Is the loss mostly at peak rpm?
(for the OPs engine, or in small block terms, 1.5hp/ci, with a 40thou mismatch)
Thanks
Paul
(for the OPs engine, or in small block terms, 1.5hp/ci, with a 40thou mismatch)
Thanks
Paul