Another intake manifold / carb size question..

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
427dart
Expert
Expert
Posts: 910
Joined: Thu Apr 02, 2015 3:23 pm
Location:

Another intake manifold / carb size question..

Post by 427dart »

On my particular dual quad intake at WOT each runner has a direct path to a carb bore/venturi but there is a smaller plenum connector opening that connects them all for part throttle use when cruising on one carbs primaries.
So at WOT should a pair of carbs be used which each have the 4 venturi and throttle bores the same size for even flow to all cylinders?
You do not have the required permissions to view the files attached to this post.
Post Reply