Here ya go. https://www.youtube.com/watch?v=m_shlwEHubQ
A dream part you wish for!
Moderator: Team
Re: A dream part you wish for!
I know this is not an engine part but I'm sure there are a lot of guys out there that would buy these ,,,,,,,,,,,,,,,
Why cant we get single hand application band aids??? how many times have you taken a bit of bark off ? decided stitches are not an option and do a bit of home surgery ? only trouble is ,the thing is leaking well past the clotting time and ,,well,, its probably a bit nastier than your own professional assessment.
All the band aid manufacturers seem to pride themselves on manufacturing something too short ,not sticky enough,not antiseptic enough, and needs a minimum of two hands to get out of the wrapper let alone onto the trench you have just managed .
I'm left handed so don't get me started on "how do you mean you cut your hand on that?"
Cheers.
Why cant we get single hand application band aids??? how many times have you taken a bit of bark off ? decided stitches are not an option and do a bit of home surgery ? only trouble is ,the thing is leaking well past the clotting time and ,,well,, its probably a bit nastier than your own professional assessment.
All the band aid manufacturers seem to pride themselves on manufacturing something too short ,not sticky enough,not antiseptic enough, and needs a minimum of two hands to get out of the wrapper let alone onto the trench you have just managed .
I'm left handed so don't get me started on "how do you mean you cut your hand on that?"
Cheers.
Re: A dream part you wish for!
It's called superglue, doctors and surgeons use it a lot.
The Older I Get, The Dumber I Get
Re: A dream part you wish for!
Unread post by Big Al » Sat Jun 09, 2018 9:43 pm
An aftermarket ECU that can handle MAF and an 1000bhp aftermarket MAF to that.
use the MAF and calibrate it to any size pipe you require to flow the 1000bhp its being done for years too
An aftermarket ECU that can handle MAF and an 1000bhp aftermarket MAF to that.
use the MAF and calibrate it to any size pipe you require to flow the 1000bhp its being done for years too
Re: A dream part you wish for!
A low profile supercharger for SBC, similar to what is available for the LS, Mod, and new hemi engines.
Fuel injection would be mandatory, hole in the hood optional.
Ken
Fuel injection would be mandatory, hole in the hood optional.
Ken
Over the hill but still learning!
Retaining it is the hard part.
Retaining it is the hard part.
Re: A dream part you wish for!
... or a hump in the floor under the car to roll that socket you dropped from rolling to the exact epicenter of the car.
So much to do, so little time...