Just stirring mate!
cleveland stroker combo
Moderator: Team
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
Re: cleveland stroker combo
^^ thats why ! I know you know the owner.
I tried to register there at one time but it kept having an error, i thought you were rejecting me lol
As i said mate just joking around !
Craig.
Re: cleveland stroker combo
Sorry, the rolling eyes emoji goes right through me every time. Lol
Please try to register again. Can always use more engine builder experience on there.
Please try to register again. Can always use more engine builder experience on there.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
Re: cleveland stroker combo
No problems ! And next time i joke around I'll use
No more rolling eyes!
Cheers,
Craig.
Re: cleveland stroker combo
All the cranks need to be checked over quite thoroughly these days. Even the made in usa ones. 4" stroke works very well.Do yourself a favour and call tmeyer his kits from molnar are specifically made for cleveland. No chevy adapted parts.
Re: cleveland stroker combo
Hey Craig, do you think we could get an advertiser like that?
And to think, we've all been using the wrong rods for decades.
And to think, we've all been using the wrong rods for decades.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
Re: cleveland stroker combo
Actually im going to provide a FREE rod alignment service, hows that for advertising !!
Post me your misaligned rods , I'll bend a little kink in the beam, chuck them back in and they will be spot on!
Craig.
-
- Guru
- Posts: 1649
- Joined: Tue Mar 06, 2007 7:23 pm
- Location: San Tan Valley, AZ
- Contact:
Re: cleveland stroker combo
Cat doesn't exist...but from what I'm hearing the other two are about to be.
Re: cleveland stroker combo
3.75 is good with a 6.125 rod but the 3.85 has better piston choice with a 6 inch rod.Mark O'Neal wrote: ↑Thu Jun 07, 2018 8:39 pm I'd also do a 3.850 with a 6.125 rod.
You can make the other 15 H/P elsewhere.
The 393 does have better piston choice compared with the 408.
-
- Guru
- Posts: 1649
- Joined: Tue Mar 06, 2007 7:23 pm
- Location: San Tan Valley, AZ
- Contact:
Re: cleveland stroker combo
I just make 'em, and I've been doing this combination since the lat 1980s.
Re: cleveland stroker combo
I'm surprised there was no mention of the 4.125" Dart block as an alternative to gain cubes.
So much to do, so little time...
Re: cleveland stroker combo
If he has a cleveland block and is a cleveland purist likely does not want the windsor block. What hp level is he looking for?And what usage? Fairly easy to get 500+ without stroker.
Re: cleveland stroker combo
If you are a Cleveland purist then there is the Arrow block option in Oz as well. That will easily go 4.125 .
Re: cleveland stroker combo
Besides the Aussie Arrow, there's Tim Meyers' new Cleveland-design blocks in both aluminum and cast iron, at a h...uvalot less shipping cost (from MI). And it's Made (cast AND machined) in USA, for those who care anymore.