Sportsman 11 Porting

General engine tech -- Drag Racing to Circle Track

Moderator: Team

statsystems
Guru
Guru
Posts: 1518
Joined: Sun Apr 03, 2016 1:17 am

Re: Sportsman 11 Porting

Post by statsystems » Thu Jun 07, 2018 5:40 pm

groberts101 wrote:
Thu Jun 07, 2018 5:20 pm
statsystems wrote:
Thu Jun 07, 2018 2:01 pm
Frankshaft wrote:
Thu Jun 07, 2018 2:00 pm


You just summerized the answer to all your questions on the 50 degree seat thread, lol.

Beat me to it. Make a decision about what you want to do and move on.
Why? I'm asking experts to clarify vague generalities they've painted with wider than typically accepted brush strokes. Maybe some don't really know everything there is to know about a subject but are afraid to fall off such a high horse for fear of others finding out is was really only a pony?

And I've quite literally read through hundreds or your regurgitated opinions gleaned from others that then magically turned into your own firsthand experiences over the years here. False pride is a virtue for some who like to build facades to show superiority over others. Maybe some of this stuff still eludes me.. but I sure as hell know psychology and am rarely paralyzed by fear. My biggest fears revolve around lost money and time.. I couldn't care less about injured pride caused by failure. Only makes me smarter and stronger in the long run.


Well then keep doing what you are doing. You have no idea what I do or have done. If you were so smart you'd be doing it. Obviously common fear is holding you back.

rewguy
Expert
Expert
Posts: 796
Joined: Mon Jun 12, 2006 2:45 am

Re: Sportsman 11 Porting

Post by rewguy » Thu Jun 07, 2018 7:30 pm

I'll tell you one thing....... I've followed EVERY BIT of advice that Maxracesoftware Larry Meaux has offered.........I've never searched for a second opinion beyond his.....And NEVER ONCE been let down. lol. FACT.

statsystems
Guru
Guru
Posts: 1518
Joined: Sun Apr 03, 2016 1:17 am

Re: Sportsman 11 Porting

Post by statsystems » Thu Jun 07, 2018 7:48 pm

rewguy wrote:
Thu Jun 07, 2018 7:30 pm
I'll tell you one thing....... I've followed EVERY BIT of advice that Maxracesoftware Larry Meaux has offered.........I've never searched for a second opinion beyond his.....And NEVER ONCE been let down. lol. FACT.
Yup.

wilson1970
Member
Member
Posts: 97
Joined: Sun May 14, 2017 3:29 pm

Re: Sportsman 11 Porting

Post by wilson1970 » Thu Jun 07, 2018 8:27 pm

Now we resort to name calling.....Sorry for wasting everyones time. Thanks to all for posting positive advice.

MELWAY
Expert
Expert
Posts: 802
Joined: Mon Dec 04, 2006 7:37 pm
Location: melbourne australia

Re: Sportsman 11 Porting

Post by MELWAY » Fri Jun 08, 2018 3:51 am

Some of us have given you good advice just ignore the wankers
Your heads are capable of 600+hp. Get the grinder and make a start
3370lb Sedan 9.89@136MPH 358chevN/A

Post Reply