Ported 2970 Edelbrock

[user-9274568]

What do you charge for something like this?

For this exact one or in general. I'd prefer to pm you if that's ok

I was just mainly comparing prices. Not a big deal. I know what I would charge, just curious.

[user-17438]

What do you charge for something like this?

For this exact one or in general. I'd prefer to pm you if that's ok

I was just mainly comparing prices. Not a big deal. I know what I would charge, just curious.

Typically $910-1500

[LB9GTA]

https://imgur.com/a/hz9fvYE
https://imgur.com/a/D5WfpSn

Got mine done too, too much work for me to do myself.
It's an art.

[Carnut1]

What kind of flow improvement are you guys seeing on a nice intake porting job like Matt has shown?

[af2]

Nice work!!!!
I was having issues with the Motown I run and went a bit further with the dividers to keep the plugs looking close to the same.




Before finish
Removed the whole Clover and shortened the dividers. Worked just as I hoped.

[user-17438]

What kind of flow improvement are you guys seeing on a nice intake porting job like Matt has shown?

500+rpm

[groberts101]

What kind of flow improvement are you guys seeing on a nice intake porting job like Matt has shown?

500+rpm

Awesome reply.. boiled right down to the end result.

[af2]

What kind of flow improvement are you guys seeing on a nice intake porting job like Matt has shown?

500+rpm

Awesome reply.. boiled right down to the end result.