0430181956b.jpg
Since Stats overloaded me to near breakdown I decided to grab my early 90's Vic jr. Tall with 1204 match and very minor porting and see how bad it is with my nearly finished Dart 215's.
Head with radius flowed 315 cfm .7" lift 2351 rpm swirl.
90's ported Vic jr. Tall, 1204 match with 770 cfm Holley, flow radius, flow @ .7" lift, 289.2 cfm and 825 rpm swirl.
Modern porting Vic jr. Tall 1206 match, with 770 cfm Holley, flow radius, flow @.7" 311 cfm 1300 rpm swirl. This one port did not take 10 min. I took a good amount out of the top of the runner as it enters the plenum. I worked on the taper but didn't go nuts. Overall I am pretty happy with what the old manifold with some work can do. Thanks, Charlie
You do not have the required permissions to view the files attached to this post.