That was my understanding as well, I don't know how many applications they get each year but maybe there is enough interest to fill both venues.Walter R. Malik wrote: ↑Sat Mar 17, 2018 9:25 amThat is not so, at all.
It was stated at last years Engine Masters Competition ... unless another sponsor and location comes forward, this contest will not be continued.
Well, another sponsor and location came forward ... it is that simple.
EMC 2018
Moderator: Team
Re: EMC 2018
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Re: EMC 2018
there is actually a link to the rules on the registration page, it didnt work for me.....HONEST!midnightbluS10 wrote: ↑Sat Mar 17, 2018 1:42 am It's not a matter of "finding them". Emc posted on the 14th to be watching for their announcement for rules. Also if you look at the bottom of the page, it has links to at least a few 2017 EMC entries, so they didn't just forgo posting results and move to 2018 like some think. "Jon Kaase takes his 7th Engine Masters Championship" posted October 2017. Seems like they posted results to me? Seems like you guys wanna hate this competition so much, now. Why? Because there's an option now?
First four competitors of the 2017 Amsoil Engine Masters Challenge
<shrug>
http://www.hotrod.com/events/engine-masters-challenge/
Rules for each class...will be posted here soon.
Thats all they've posted so far. I'd expect them within a week since they were posted at the end of Feb last year. And likely, you won't have to find them. They'll probably be posted in the open for ALL to see <shrug>
thats why i asked if anyone found them..sorry,,hope you can forgive me.
and can you show me where the results are for last year, all of them and the build details?
Re: EMC 2018
And the fact that Engine Masters would always announce the details for the next year's competition at the PRI trade show, and this year they had nothing at PRI.GARY C wrote: ↑Sat Mar 17, 2018 11:38 amThat was my understanding as well, I don't know how many applications they get each year but maybe there is enough interest to fill both venues.Walter R. Malik wrote: ↑Sat Mar 17, 2018 9:25 am
That is not so, at all.
It was stated at last years Engine Masters Competition ... unless another sponsor and location comes forward, this contest will not be continued.
Well, another sponsor and location came forward ... it is that simple.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
- midnightbluS10
- Expert
- Posts: 933
- Joined: Sun Oct 20, 2013 8:41 am
- Location: Shreveport, LA
Re: EMC 2018
Can I show you? No. You're a grown ass man. Do it for yourself. You're not handicapped. Mentally or physically. Your fingers work just like mine do. If I can find it, so can anyone else.gmrocket wrote: ↑Sat Mar 17, 2018 7:07 pmthere is actually a link to the rules on the registration page, it didnt work for me.....HONEST!midnightbluS10 wrote: ↑Sat Mar 17, 2018 1:42 am It's not a matter of "finding them". Emc posted on the 14th to be watching for their announcement for rules. Also if you look at the bottom of the page, it has links to at least a few 2017 EMC entries, so they didn't just forgo posting results and move to 2018 like some think. "Jon Kaase takes his 7th Engine Masters Championship" posted October 2017. Seems like they posted results to me? Seems like you guys wanna hate this competition so much, now. Why? Because there's an option now?
First four competitors of the 2017 Amsoil Engine Masters Challenge
<shrug>
http://www.hotrod.com/events/engine-masters-challenge/
Rules for each class...will be posted here soon.
Thats all they've posted so far. I'd expect them within a week since they were posted at the end of Feb last year. And likely, you won't have to find them. They'll probably be posted in the open for ALL to see <shrug>
thats why i asked if anyone found them..sorry,,hope you can forgive me.
and can you show me where the results are for last year, all of them and the build details?
JC -
bigjoe1 wrote:By the way, I had a long talk with Harold(Brookshire) last year at the PRI show. We met at the airport and he told me everything he knew about everything.It was a nice visit. JOE SHERMAN RACING
Re: EMC 2018
Aw, come on... help me out.midnightbluS10 wrote: ↑Tue Mar 20, 2018 4:14 amCan I show you? No. You're a grown ass man. Do it for yourself. You're not handicapped. Mentally or physically. Your fingers work just like mine do. If I can find it, so can anyone else.gmrocket wrote: ↑Sat Mar 17, 2018 7:07 pmthere is actually a link to the rules on the registration page, it didnt work for me.....HONEST!midnightbluS10 wrote: ↑Sat Mar 17, 2018 1:42 am It's not a matter of "finding them". Emc posted on the 14th to be watching for their announcement for rules. Also if you look at the bottom of the page, it has links to at least a few 2017 EMC entries, so they didn't just forgo posting results and move to 2018 like some think. "Jon Kaase takes his 7th Engine Masters Championship" posted October 2017. Seems like they posted results to me? Seems like you guys wanna hate this competition so much, now. Why? Because there's an option now?
First four competitors of the 2017 Amsoil Engine Masters Challenge
<shrug>
http://www.hotrod.com/events/engine-masters-challenge/
Thats all they've posted so far. I'd expect them within a week since they were posted at the end of Feb last year. And likely, you won't have to find them. They'll probably be posted in the open for ALL to see <shrug>
thats why i asked if anyone found them..sorry,,hope you can forgive me.
and can you show me where the results are for last year, all of them and the build details?
There were 14 traditional muscle entries and 10 vintage, can you give me a hint to where I can find all 24 of the engines, tq&hp , the details,how they scored and what place? Like they did every other year
Was this info in a magazine or online somewhere?
Re: EMC 2018
I looked for an AMC entry yesterday and couldn't find it. Jim Schmitz was the builder. 2017
Some people have better luck with keywords than others and I apparently suck at it.
Some people have better luck with keywords than others and I apparently suck at it.
Re: EMC 2018
I saw an interview with that guy on youtube. Talked to him throughout the week of EMC. But yet, no interview on youtube with the team that won the damn thing. Go figure.
Re: EMC 2018
It was on their live feed, I think it was Face Book, I didn't know they put them yt.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
- midnightbluS10
- Expert
- Posts: 933
- Joined: Sun Oct 20, 2013 8:41 am
- Location: Shreveport, LA
Re: EMC 2018
Rules are up for anyone who may be interested.
JC -
bigjoe1 wrote:By the way, I had a long talk with Harold(Brookshire) last year at the PRI show. We met at the airport and he told me everything he knew about everything.It was a nice visit. JOE SHERMAN RACING
-
- Guru
- Posts: 3281
- Joined: Wed Jun 25, 2008 1:46 pm
- Location: NC
-
- Guru
- Posts: 1575
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
-
- Guru
- Posts: 3281
- Joined: Wed Jun 25, 2008 1:46 pm
- Location: NC
-
- New Member
- Posts: 9
- Joined: Mon Nov 24, 2014 1:50 pm
- Location: Charlotte, NC
Re: EMC 2018
Wow...Traditional Muscle now allows a roller cam. So the rules have moved from sixties technology into the eighties.
-
- Guru
- Posts: 6378
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: EMC 2018
Something is just not right with that camshaft rule as written.TexBlackwell wrote: ↑Mon Mar 26, 2018 5:15 pm Wow...Traditional Muscle now allows a roller cam. So the rules have moved from sixties technology into the eighties.
It says you can use a roller or Nitrided camshaft but, also says, "Standard iron camshaft cores for the engine type required' ...
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.