Hi. Anyone know if the MSD 6011 Box controlling ignition on a Ford Mod motor has the ability to drive the LS coils?
Am putting this on a SBF With crank & cam trigger and carbs. So, COP is a non-option....
You might even know of a easier/ cheaper way to do this (other than the MS-Products)?
MSD Ford Mod ign controller & LS coils?
Moderator: Team
- Caprimaniac
- Guru
- Posts: 1062
- Joined: Fri Nov 18, 2011 1:17 pm
- Location: NORWAY
-
- New Member
- Posts: 1
- Joined: Sat Sep 30, 2017 8:36 pm
- Location:
Re: MSD Ford Mod ign controller & LS coils?
Though I don't have much experience with Ford coils, I do know that modular coils are a 2-wire external ignitor type coil. All ls coils are internally ignited. It won't work because the controller is going to control the current, not give a logic output for the ignitor. I may be wrong, but this is what my limited experience is saying.
- Caprimaniac
- Guru
- Posts: 1062
- Joined: Fri Nov 18, 2011 1:17 pm
- Location: NORWAY
Re: MSD Ford Mod ign controller & LS coils?
That doesn't sound too promising.... I will look closer
And that part was easy. Fould coils without ignitiörs. Som this could be a solution. https://www.diyautotune.com/product/ign ... tive-coil/
And that part was easy. Fould coils without ignitiörs. Som this could be a solution. https://www.diyautotune.com/product/ign ... tive-coil/
How to turn GURU in an instant.....
Re: MSD Ford Mod ign controller & LS coils?
Not only that but on is off and off is on.
antondpf22 wrote: ↑Mon Mar 12, 2018 1:11 pm I do know that modular coils are a 2-wire external ignitor type coil. All ls coils are internally ignited. It won't work because the controller is going to control the current, not give a logic output for the ignitor.