MSD Ford Mod ign controller & LS coils?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
User avatar
Caprimaniac
Expert
Expert
Posts: 705
Joined: Fri Nov 18, 2011 1:17 pm
Location: NORWAY

MSD Ford Mod ign controller & LS coils?

Post by Caprimaniac » Sun Mar 11, 2018 5:45 pm

Hi. Anyone know if the MSD 6011 Box controlling ignition on a Ford Mod motor has the ability to drive the LS coils?

Am putting this on a SBF With crank & cam trigger and carbs. So, COP is a non-option....

You might even know of a easier/ cheaper way to do this (other than the MS-Products)?
How to turn GURU in an instant.....

antondpf22
New Member
New Member
Posts: 1
Joined: Sat Sep 30, 2017 8:36 pm

Re: MSD Ford Mod ign controller & LS coils?

Post by antondpf22 » Mon Mar 12, 2018 1:11 pm

Though I don't have much experience with Ford coils, I do know that modular coils are a 2-wire external ignitor type coil. All ls coils are internally ignited. It won't work because the controller is going to control the current, not give a logic output for the ignitor. I may be wrong, but this is what my limited experience is saying.

User avatar
Caprimaniac
Expert
Expert
Posts: 705
Joined: Fri Nov 18, 2011 1:17 pm
Location: NORWAY

Re: MSD Ford Mod ign controller & LS coils?

Post by Caprimaniac » Wed Mar 14, 2018 5:38 pm

That doesn't sound too promising.... I will look closer

And that part was easy. Fould coils without ignitiörs. Som this could be a solution. https://www.diyautotune.com/product/ign ... tive-coil/
How to turn GURU in an instant.....

joe 90
Guru
Guru
Posts: 2461
Joined: Tue May 27, 2014 4:02 am
Location: The land of the long white cloud

Re: MSD Ford Mod ign controller & LS coils?

Post by joe 90 » Fri Mar 16, 2018 1:23 am

Not only that but on is off and off is on.
antondpf22 wrote:
Mon Mar 12, 2018 1:11 pm
I do know that modular coils are a 2-wire external ignitor type coil. All ls coils are internally ignited. It won't work because the controller is going to control the current, not give a logic output for the ignitor.

Post Reply