Re: Valve Seat Angles and Flow Area
Posted: Sun Mar 11, 2018 5:52 pm
Thanks for that, Mike. Will PM you and fill out your web questionaire with more specific requirements.CamKing wrote: ↑Sat Mar 10, 2018 5:37 pmYou leave the intake centerline alone. You reduce the exhaust duration, and you move the exhaust centerline to keep the same overlap. This will give you a narrower LSA.groberts101 wrote: ↑Sat Mar 10, 2018 5:05 pm My 1st instinct is to spread the lobes a tad more than typical for similar combo's and/or run less exhaust duration with less lift?