Best Bang-For-Your-Buck Crank & Rods?

[JoePorting]

So what is everyone's best bang-for-the-buck Crank & Rods for a SBC? I was about to order a 4340 SBC crank and rod set from Scat and I'd thought I'd check out here to see if there's something better that won't break the bank.

[user-30257]

I like Molnars stuff

[cgarb]

What HP engine are you talking about? I've had good luck with scats lightweight cast cranks at 450-500hp level on my own personal engine and one I built for my step brother. Mine has 9 years of bracket racing on it, still passes a mag test and mics good.

[SupStk]

I use a lot of Scat cranks and rods. Prices I consider good and the care in machining is evident.

[racear2865]

1: Molner
2: Scat
3: Uh cant think of a 3rd
reed

[Orr89rocz]

Made 1400 hp on callies compstar crank and h beams. When i bought them they were like 200$ cheaper then i believe. Back in 08-09

But they are good

[engineguyBill]

Depends on what the engine will be used for. Street/Strip/Bracket racer, Scat crank and rods are best value, in my opinion.