041 Chevy heads
Moderator: Team
041 Chevy heads
How much can I angle mill a set of 041's and be safe? Customer wants max compression with flat top pistons. Rules don't allow vortec heads even though they would probably be cheaper and run better.
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: 041 Chevy heads
What's your piston to valve clearance now?
If the heads just flow stock numbers then unless you can Mill enough to pick up atleast 3/4 point of compression I don't know that I would waste my time, as you would likley find more power by running a longer, but colder spark plug.
If the heads just flow stock numbers then unless you can Mill enough to pick up atleast 3/4 point of compression I don't know that I would waste my time, as you would likley find more power by running a longer, but colder spark plug.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: 041 Chevy heads
I have done them .100. But you have to plug up the spark plug cooling holes near the edge of the deck.
Real Race Cars Don't Have Doors
Re: 041 Chevy heads
The only limit I know of is the intake seat, I have cut .125 many times. It's something you have to keep an eye on the job, not all heads will go to an exact number, .100 is an easy safe number. Like ProPower say's you need to plug the spark plug cooling holes. I stop milling when I am into the valve seat. I do cut the last .005 - .010 flat. Pay attention to valve pocket radial, the maximum angle I have ended up with is 21.5*
Re: 041 Chevy heads
Thanks, guys! Its for a 2- barrell stock class. Stock cast iron intake too. Figured getting the compression up will help as much as anything. No port work allowed
Re: 041 Chevy heads
Thanks, guys! Its for a 2- barrell stock class. Stock cast iron intake too. Figured getting the compression up will help as much as anything. No port work allowed
Re: 041 Chevy heads
LOL Yea, the were measuring stroke with a tape measure a couple seasons ago so...
Re: 041 Chevy heads
Fwiw, my old pair of 305HO, -601, 53 cc chamber, 1.84"/1.50" valve heads should be looked into here.
My set cc at 53 and 55 cc's and also at 160 cc's intake port size. They have a double-quench shaped chamber not unlike the old -461, "fuelie", head.
pdq67
My set cc at 53 and 55 cc's and also at 160 cc's intake port size. They have a double-quench shaped chamber not unlike the old -461, "fuelie", head.
pdq67