Cam Swap Advice

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Aukai
Member
Member
Posts: 85
Joined: Fri Apr 03, 2009 12:58 am
Location: Kapaa Kauai Hawaii

Re: Cam Swap Advice

Post by Aukai »

That's going to be a hand full of fun. :!:
Mike Lewis street 572
Holley HP EFI
http://www.lewisracingengines.com/

"You know you have the power, and if you use that power bad things are going to happen"
Greenville68
New Member
New Member
Posts: 24
Joined: Sun Feb 04, 2018 2:17 pm
Location:

Re: Cam Swap Advice

Post by Greenville68 »

Aukai wrote: Fri Feb 23, 2018 3:59 pm That's going to be a hand full of fun. :!:
I sure hope so...it should scare me a little if I get it to hook up, which was a secret goal. My last LSX 383 stopped making me giggle and hard to get inspected, so this is where I landed. I figure this base setup still has room to grow too.

Cheers
Aukai
Member
Member
Posts: 85
Joined: Fri Apr 03, 2009 12:58 am
Location: Kapaa Kauai Hawaii

Re: Cam Swap Advice

Post by Aukai »

It may get your attention more if it doesn't hook up. Just remember whatever direction the front is pointing at, is where it's gonna go when the tire speed comes back down :shock:
Mike Lewis street 572
Holley HP EFI
http://www.lewisracingengines.com/

"You know you have the power, and if you use that power bad things are going to happen"
Post Reply