Monty,
Can't say as I ever thought of using the saw on fat pads. Have used the mill to rough cut before though.
balancing question
Moderator: Team
- Dave Koehler
- Vendor
- Posts: 7207
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: balancing question
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Re: balancing question
I've done caps on the mill too, Dave. Find it faster, especially the small end, on the band saw.Dave Koehler wrote: ↑Mon Feb 05, 2018 11:10 am Monty,
Can't say as I ever thought of using the saw on fat pads. Have used the mill to rough cut before though.
Monty Frerichs
B&M Machine
B&M Machine