421 cube pulling truck engine
Moderator: Team
Re: 421 cube pulling truck engine
https://www.youtube.com/watch?v=O-h8N-M52zo
The pull at Braymer MO.
Truck pullers, how's the truck working ?
I think he needed to be a little meaner to the clutch at the starting line to keep the rpm up more. The sled was set up tight. No one in our class went 300' we went 291 and change.
Randy
The pull at Braymer MO.
Truck pullers, how's the truck working ?
I think he needed to be a little meaner to the clutch at the starting line to keep the rpm up more. The sled was set up tight. No one in our class went 300' we went 291 and change.
Randy
Re: 421 cube pulling truck engine
Got that truck crankin' for sure. Sounds good to me. Don't know much about pulling, but the truck looks planted the whole run no hopping and jumping. I see what your saying, did seem like he rode the clutch out, maybe some more initial wheel speed would get it up and moving quicker.
-
- Pro
- Posts: 212
- Joined: Mon Jun 24, 2013 1:16 pm
- Location:
Re: 421 cube pulling truck engine
Yeah truck pulling is hard on parts my brother normally pulls new vergina and diagonal plus couple others
Was mr grizzly there? Or the molar boys
Was mr grizzly there? Or the molar boys
-
- Pro
- Posts: 212
- Joined: Mon Jun 24, 2013 1:16 pm
- Location:
Re: 421 cube pulling truck engine
Yes, so far.
No, Brian Brotherton beat us, the green never enough chevy.
Randy
Re: 421 cube pulling truck engine
Do many people run automatic trans? Just wondering how a well built glide or TH400 would work in an application like that.
-
- Pro
- Posts: 212
- Joined: Mon Jun 24, 2013 1:16 pm
- Location:
Re: 421 cube pulling truck engine
Not very many people run autos around here
We’ve talked about ifs before how’d it work
I know there’s a big truck that’s trying it out it will be the true test see how it handles 1200hp
Is he running nv4500 or 3 speed setup
We’ve talked about ifs before how’d it work
I know there’s a big truck that’s trying it out it will be the true test see how it handles 1200hp
Is he running nv4500 or 3 speed setup
Re: 421 cube pulling truck engine
Well,...went to our second IAMO pull at Milan MO. and came up second place again.
We pulled 317.03
First was 317.18. So close. LOL
Randy
We pulled 317.03
First was 317.18. So close. LOL
Randy
Re: 421 cube pulling truck engine
You do not have the required permissions to view the files attached to this post.
Re: 421 cube pulling truck engine
The Milan pull.
https://www.youtube.com/watch?v=0tF1qADXJTw
Change of tire pressure, q16 maybe, wouldn't have needed much to pull 2 inches farther.
2 way tie for first place in prostreet points now.
Randy
https://www.youtube.com/watch?v=0tF1qADXJTw
Change of tire pressure, q16 maybe, wouldn't have needed much to pull 2 inches farther.
2 way tie for first place in prostreet points now.
Randy
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
Re: 421 cube pulling truck engine
Man that must be hard on parts!randy331 wrote: ↑Sun Jun 17, 2018 11:07 pm The Milan pull.
https://www.youtube.com/watch?v=0tF1qADXJTw
Change of tire pressure, q16 maybe, wouldn't have needed much to pull 2 inches farther.
2 way tie for first place in prostreet points now.
Randy
What transmission do you run in these?
What rear gear?
Craig.
Re: 421 cube pulling truck engine
Yes it's hard on parts.cjperformance wrote: ↑Sun Jun 17, 2018 11:19 pmMan that must be hard on parts!randy331 wrote: ↑Sun Jun 17, 2018 11:07 pm The Milan pull.
https://www.youtube.com/watch?v=0tF1qADXJTw
Change of tire pressure, q16 maybe, wouldn't have needed much to pull 2 inches farther.
2 way tie for first place in prostreet points now.
Randy
What transmission do you run in these?
What rear gear?
Diff gear is 4.10
sm 465 trans.
Dual clutch discs
He didn't let off the clutch till 200' on that run.
The clutch comes in on it's own. Just hold it to the floor and rpm will engage it. Set up to come in about 8000 rpm right now.
Randy
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
Re: 421 cube pulling truck engine
Nice, i can see that being a very costly sport!randy331 wrote: ↑Sun Jun 17, 2018 11:27 pmYes it's hard on parts.cjperformance wrote: ↑Sun Jun 17, 2018 11:19 pmMan that must be hard on parts!randy331 wrote: ↑Sun Jun 17, 2018 11:07 pm The Milan pull.
https://www.youtube.com/watch?v=0tF1qADXJTw
Change of tire pressure, q16 maybe, wouldn't have needed much to pull 2 inches farther.
2 way tie for first place in prostreet points now.
Randy
What transmission do you run in these?
What rear gear?
Diff gear is 4.10
sm 465 trans.
Dual clutch discs
He didn't let off the clutch till 200' on that run.
The clutch comes in on it's own. Just hold it to the floor and rpm will engage it. Set up to come in about 8000 rpm right now.
Randy
Craig.