Roller lifter checking fixture

General engine tech -- Drag Racing to Circle Track

Moderator: Team

peejay
Guru
Guru
Posts: 1448
Joined: Tue Aug 10, 2010 9:16 pm

Re: Roller lifter checking fixture

Post by peejay » Tue Jan 16, 2018 6:23 am

That is what I was getting at.... I'd be more inclined to believe that the lattice of iron that gets stretched and warped enough to need to get decked and align honed/bored, might not have lifter bores in proper alignment with the cam, even if the lifters were perfect.

Post Reply