Bmod 1960 spacer from speedway question

[phantomfab]

Is there anything special about the 135-1960 spacer that has to be run on the B-mods for the concept engine or is there one somewhere that is cheaper than $80? Seems high considering i have atleast 4 different spacers of that design already. And im only wanting to try the 4 barrel on my "spec" engine this upcoming season as it is "concept" legal.

[ZIGGY]

Since this appears to be a Wissota spec piece with a spec number on it, and likely that means
someone is paying Wissota for the privilege of making and/or selling it, why would you expect
to find a new one cheap? Find a used one or make your own forgery. If

im only wanting to try the 4 barrel

, then stick one of your 1" spacers with matching 1.693 holes on your engine and don't end up where you'll be teched on race day.

[Krooser]

Wissota is known for teaching the low hanging fruit and the top of the engine is a prime target...

[DaveMcLain]

All it is is a four hole spacer yet it has to be something special? What an idiotic rule.

[Krooser]

Wissota and IMCA are full of them... the funny thing is so many racers don't have a clue.